Philips 19PFL5622D User Manual download pdf (Page 47)

Trouble Shooting Tips

Symptoms Items to Check and Actions to follow

“Ghost” or double

images

• This may be caused by obstruction to the antenna due to high rise buildings or hills.

Using a highly directional antenna may improve the picture.

No power • Check that the TV’s AC power cord is plugged into the mains socket.

• Unplug the television, wait for 60 seconds. Then re-insert plug into the mains socket

and turn on the television again.

No picture • Check antenna connections at the bottom of the TV to see if they are properly connected to the TV.

• Possible broadcast station trouble. Try another channel.

• Adjust the contrast and brightness settings. Try another auto picture setting.

• Check the Closed Captions control. Some TEXT modes could block the screen.

• Check if you selected the correct AV source.

No picture and power

switched on

• Your TV has a protective mode in case there is too much heat build-up. Check the

clearance around the vents of the device to be certain there are no blocking walls or

cabinets which would limit the air flow.

Picture position

adjustment

When displaying a High Definition signal from the YPbPr inputs or HDMI input, if necessary, you can

adjust the picture position to the center of the screen with the cursor left/right or up/down buttons on

the remote control. This may be needed due to slight differences in output signals from different brands

and types of HD source boxes.

Notes: Most High Definition receiver boxes also have picture-positioning controls in their menu

systems. If the TV cursor controls run out of range before the picture is correctly positioned, the

receiver box controls will need to be adjusted.

No photo, music or

video play or in poor

quality only

• Check if the source complies with a supported code.

No sound • Increase the VOLUME.

• Check that the TV is not muted, press the MUTE button on the remote control.

• When no signal is detected, the TV automatically switches off the sound. This is proper

operation and does not indicate a malfunction.

Good sound but poor

color or no picture

• Adjust the contrast, color, tint and brightness setting. Try another auto picture setting.

Snowish picture and

noise

• Check the antenna connection.

Television not

responding to

remote control

• Check whether the batteries are working. Replace if necessary.

• Clean the remote control sensor lens on the monitor.

• Operating range between TV and the remote control should not be more than approximately twenty feet.

• You can still use the buttons on the top of your TV.

• Check if the remote control is in the correct mode.

Control of accessory

devices

• The infrared signals of the screen may influence the reception sensibility of other peripherals Solution:

replace the batteries of the remote control of other devices. E.g. keep away a wireless headphone from

within a radius of approximately four feet.

The software will not

install

Possibly the operating system is wrong.

Go to www.philips.com/welcome to see which operating systems are supported.

PC modes do not

work

• Check whether connections are correct.

• Check whether the source is correctly selected. Press SOURCE button to select the correct source.

• Check whether you have configured the computer on a compatible display resolution.

Standby Your TV consumes energy less than 1w in the standby mode.

After improper

shutdown

If your TV has been shutdown in an improper way (e.g. power drop, power cord plug out), starting up the

TV again will take a longer time than usual.

Miscellaneous See Extras, Specifications on this user manual.

1 ... 46 47 48 49 50 51 52 53 54

Comments to this Manuals

No comments

Philips 19PFL5622D User Manual Page 47

Comments to this Manuals

Related products and manuals for LCD TVs Philips 19PFL5622D