Philips HR7754/01 User Manual download pdf (Page 7)

ENGLISH 7

◗ Check if the voltage indicated on the

appliance corresponds to the local mains

voltage before you connect the appliance.

◗ Never use any accessories or parts from

other manufacturers or that have not been

specifically advised by Philips.Your guarantee

will become invalid if such accessories or

parts have been used.

◗ Do not use the appliance if the mains cord,

the plug or other parts are damaged.

◗ If the mains cord is damaged, it must be

replaced by Philips, a service centre

authorised by Philips or similarly qualified

persons in order to avoid a hazard.

◗ Thoroughly clean the parts that will come

into contact with food before you use the

appliance for the first time.

◗ Do not exceed the quantities and preparation

times indicated in the table.

◗ Do not exceed the maximum content

indicated on the bowl, i.e. do not fill beyond

the top graduation.

◗ Unplug the appliance immediately after use.

◗ Never use your fingers or an object (e.g. a

spatula) to push ingredients down the feed

tube while the appliance is running. Only the

pusher is to be used for this purpose.

◗ Always unplug the appliance before reaching

into the blender jar with your fingers or an

object (e.g. a spatula).

◗ Keep the appliance out of the reach of

children.

◗ Never let the appliance run unattended.

◗ Place the lid on the bowl in the right position.

The build-in safety lock will now be deblocked

and you will be able to turn the appliance on.

Both the motor unit and the screw cap have

been provided with marks.The appliance will

only function if the mark on the motor unit is

directly opposite the mark on the screw cap.

◗ Switch the appliance off before detaching any

accessory.

◗ Always switch the appliance off by pressing

the STOP button.

◗ Wait until moving parts have stopped running

before you remove the lid of the appliance.

◗ The screw cap can only be removed if the lid

is not on the bowl or if the bowl has been

removed altogether.

◗ Never immerse the motor unit in water or

any other fluid, nor rinse it under the tap. Use

only a moist cloth to clean the motor unit.

◗ Remove the protective cover from the blade

before use.

◗ Let hot ingredients cool down before

processing them (max. temperature

80cC/175cF).

◗ If you are processing a liquid that is hot or

tends to foam, do not put more than 1 litre

into the blender jar to avoid spillage.

◗ Unplug the appliance immediately after use.

◗ For application times, see the table further on

in these instructions for use.

◗ Noise level: Lc= 89 dB [A]

Note that it is not possible to use the

bowlfunctions when the blender is attached.

1 2 3 4 5 6 7 8 9 10 11 12 ... 181 182

Comments to this Manuals

No comments