Philips HR1949/20 User Manual download pdf (Page 6)

ENGLISH

- Do not use the appliance outdoors.

- Avoid contact with moving parts.

- Make sure all parts are assembled properly before you

switch on the appliance.

- Only use the appliance when the locking clamp is in

locked position.

- Only unlock the locking clamp after you have switched

o the appliance and the juicing screw has stopped

rotating.

- Do not remove the pulp container when the appliance

is operating.

- Cut large ingredients into pieces that t into the feeding

tube. Remove stones, cores, seeds and thick peels from

fruits or vegetables before juicing.

- Do not exert too much pressure on the pusher to avoid

damage.

- Food colouring can discolour parts. This is normal and

has no impact on the performance of the appliance.

- To optimise the lifetime of the appliance, do not use it

continuously for more than 30 minutes.

Built-in safety lock

The appliance is equipped with a built-in safety lock. The safety pins on the motor

unit ensure that you can only switch on the appliance if you have placed the juicing

unit and the pulp container on the motor unit correctly.

Electromagnetic elds (EMF)

This Philips appliance complies with all applicable standards and regulations

regarding exposure to electromagnetic elds.

Before rst use

Thoroughly clean all parts before you use the appliance for the rst time (see

chapter ‘Cleaning’).

Note: Make sure all parts are completely dry before you start using the appliance.

Preparing for use

Assembling the juicing unit

1 Attach the pulp outlet to the juicing unit and turn it clockwise until the arrow

(

) points to the ‘locked’ indication. (Fig. 2)

2 Insert the juicing screw into the juicing unit (Fig. 3).

3 Assemble the two parts of the lter (Fig. 4).

4 Place the two-part lter over the juicing screw (Fig. 5).

1 2 3 4 5 6 7 8 9 10 11 ... 44 45

No comments

Philips HR1949/20 User Manual Page 6