Philips MCD196/58 User Manual download pdf (Page 14)

14

English

FM Antenna

● For better FM stereo reception, connect an

outdoor FM antenna to the FM AERIAL (FM

ANTENNA) terminal.

Step 4: Connecting TV

IMPORTANT!

–You only need to make one video

connection from the following options,

depending on the capabilities of your TV

system.

– Connect the DVD system directly to

the TV.

Using Video In jack (CVBS)

1 Use the composite video cable (yellow) to

connect the system's VIDEO jack to the video

input jack (or labelled as A/V In, Video In,

Composite or Baseband) on the TV set.

2 To hear the sound of this DVD Player through

your TV, use the audio cables (white/red-not

supplied) to connect LINE OUT (L/R) jacks of

the DVD Player to the corresponding AUDIO

IN jacks on the TV.

Connections

Step 2: Connecting speakers

1

2

Connect the speaker wires to the SPEAKER

terminals, right speaker to "R" and left speaker to

"L", coloured (marked) wire to "+" and black

(unmarked) wire to "-". Fully insert the stripped

portion of the speaker wire into the terminal as

shown.

Notes:

– Ensure that the speaker cables are correctly

connected. Improper connections may damage the

system due to short-circuit.

–For optimal sound performance, use the

supplied speakers.

– Do not connect more than one speaker to any

one pair of +/- speaker terminals.

– Do not connect speakers with an impedance

lower than the speakers supplied. Please refer to

the SPECIFICATIONS section of this manual.

Step 3: Antenna connection

Connect the supplied MW loop antenna and FM

antenna to the respective terminals. Adjust the

position of the antenna for optimal reception.

MW Antenna

● Position the antenna as far as possible from a TV,

VCR or other radiation source.

MCD 196_58_IFU_Eng 2007.4.30, 15:1614

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 37 38

Comments to this Manuals

No comments