Philips LX7000SA User Manual download pdf (Page 17)

English

ö Digital Crystal Clear (on Pr/Cr Pb/Cb Y

Progressive Scan Video Out only)

It allows you to fine-tune the following settings (Gamma,

Sha De and DCDi) on the progressive

scan output Use 3 4 to adjust the values of these settings,

then press OK to exit.

Gam - allows you to adjust the intensity of the picture

non-linearly. A positive value allows you to bring out low

level detail in dark scenes, while a negative value will

emphasize contrast.

Sha-allows you to adjust sharpness of the picture.

ChrDe - is where the chrome (color) and luma

(brightness) signals are not synchronized. This allows you to

adjust the advance delay of the chrome signal to yield a

perfectly clear picture.

DCD (New Directional Correlation Deinterlacing)-

computes and tracks the angle of edge to fill in the missing

pixel on the TV screen. Switching DCDi ON will optimize

the image quality significantly, especially during the slow

motion playback.

ö TV System (NTSC/PAL conversion)

This setting is applicable only if you used the CVBS or

Pr/Cr Pb/Cb Y jacks to connect the DVD system to a TV.

Select the color system that matches the connected TV.

Youdo not need to change the setting if your TV is

NTSThefactorydefault setting is NTSC.

However, it will not support the PAL format DVDs and

playback of a PAL DVD is not possible.

If your TV is compatible with both NTSC and PAL,

select AUTO.

If your TV is PAL-compatible,

sel PA . It will change the video signal of a NTSC disc

and playback in PAL format.

Note:

– Slight picture distortions may occur due to this conversion.

This is normal.

PREPARATIONS

Setting the sound

Digital output

Analog output

Night mode

Karaoke vocal

PCM output

Stereo

48 KHZ

All

1en

st1

Speakers

Settings...

Off

ö Digital output

Digital output lets you specify the type of digital output

available with the other equipment connected.

Select All, if you have onnected the D m’s

DIGITAL OUT jack to an equipment that has a

multichannel decoder.

Select PCM only (default setting), if the other quipment is

not capable of decoding multichannel audio.

Select Off to deactivate the digital output.

Note:

– You cannot hear the SACD or MP3-CD playback if you use

the digital connection.

ö Analog output

Select Stereo, 3D und rround) nel

to match your DVD home cinema system’s playback

capability.

This function can also be accessed via the

SURROUND button on the remote control.

ö Night mode

Select On to level out the olume, high lume puts ll

be softened. For example, the disc will play at the same

sound level throughout the movie.

ö Karaoke vocal (not functional for this model)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 32 33

Comments to this Manuals

No comments

Philips LX7000SA User Manual Page 17

Comments to this Manuals

Related products and manuals for Home audio sets Philips LX7000SA