Philips AZ302 User Manual download pdf (Page 10)

Problem

– Possible cause

• Remedy

No sound /power

– Volume not adjusted

• AdjusttheVOLUME

– Power cord not securely connected

• ConnecttheACpowercordproperly

– Batteries dead/ incorrectly inserted

• Insert(fresh)batteriescorrectly

– CD contains non-audio files

• Press

∞

once or more to skip to a CD

audio track, instead of the data file.

Display does not function properly / No

reaction to operation of any of the

controls

– Electrostatic discharge

• Switchoffandunplugtheset.Reconnectaftera

few seconds

--, Er

01 indication

– No CD inserted

• InsertaCD

– CD badly scratched or dirty

• Replace/cleanCD,seeMaintenance

– Laser lens steamed up

• Waituntillenshascleared

– CD-R/CD-RW is blank or not finalized

• UseafinalizedCD-R/CD-RWorsuitableCD

Audio disc only

Note:

Make sure the CD is not encoded with

do not conform to the Compact Disc

standard.

The CD skips tracks

– CD damaged or dirty

• ReplaceorcleanCD

– Program/shuffle is active

• Quitprogram/shufflemode

Note: A CD badly scratch or dirty may result in

improper operation.

Sound skips during MP3 playback

– MP3 file made at compression level exceeding

320kbps

• Use a lower compression level to record CD

tracks into MP3 format

– Disc damaged or dirty

• Replaceorcleandisc

Troubleshooting

If a fault occurs, first check the points listed below before taking the set for repair.

If you are unable to remedy a problem by following these hints, consult your dealer or service

centre.

WARNING: Do not open the set as there is a risk of electric shock. Under no

circumstances should you try to repair the set yourself, as this will

invalidate the guarantee.

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Philips AZ302 User Manual Page 10

Comments to this Manuals

Related products and manuals for Home audio sets Philips AZ302