Philips AZ1080 User Manual download pdf (Page 14)

English

If a fault occurs, ﬁrst check the points listed below before taking the set for repair. Do

not open the set as there is a risk of electric shock.

If you are unable to remedy a problem by following these hints, consult your dealer or

service centre.

WARNING: Under no circumstances should you try to repair the set yourself, as this

will invalidate the guarantee.

Troubleshooting

Problem Solution

No sound – Adjust the VOLUME

No power – Mains lead not securely connected.

Connect AC mains lead properly

– Batteries exhausted /incorrectly inserted.

Insert (fresh) batteries correctly

Display does not function – Electrostatic discharge

properly/ No reaction to Switch off and unplug the set. Reconnect after a few

operation of any of the seconds.

controls

Er indication – No CD inserted, insert a CD

– CD badly scratched/ dirty.

Replace/ clean CD (see maintenance)

– CD-R(W) is blank or the disc is not ﬁnalized.

Use a ﬁnalized CD-R(W)

– Laser lens steamed up.

Wait until lens has cleared/acclimatized

CD playback does not work – CD badly scratched/ dirty.

Replace/ clean CD (see maintenance)

The CD skips tracks – CD damaged or dirty. Replace or clean CD.

– Shufﬂe is active. Quit shufﬂe mode

Poor cassette sound quality – Dust and dirt on the heads, etc.

Clean deck parts, see maintenance.

– Use of incompatible cassette types (METAL or

CHROME). Only use NORMAL (IEC I) for recording

Recording does not work – Cassette tab(s) may be broken. Apply a piece of

adhesive tape over the missing tab space.

AZ1080/00A 03/13/02 10:06 Page 13

1 2 ... 9 10 11 12 13 14

No comments

Philips AZ1080 User Manual Page 14