Philips DVDR980 User Manual download pdf (Page 32)

English

32 RECORDING

l The recorder automatically jumps to the end of the

last title on the disc and starts recording.

‰ If no free space is left. The display will show

‘DISC FULL’. Safe record is not possible then.

Recordings on DVD+R are always automatically made

after the last title on the disc.

Direct Record

With Direct Record you can start recording immediately

from the programme selected on the TV set.

l Make sure ‘Direct Record’ is switched ‘

’.

(See record settings).

l On the TV set, select the programme number you

want make the recording from.

l Make sure the DVD recorder is switched to

standby.

l Press RECORD (on the recorder) or REC/OTR

(on the remote control).

Notes :

- Don’t select another programme number on your TV set,

until the ‘WAIT’ on the display of your DVD recorder

disappears. This can take up to one minute.

- When ‘NOTV’ appears on the display, the programme

number could not be found. The DVD recorder switches off

automatically.

- If your loudspeakers are connected (via an amplifier /

receiver) to your DVD recorder, the sound will be delayed

relative to the TV picture when recording directly from the TV

set.

- You can use Direct Record in combination with Safe Record.

Manual audio control

You can control the audio recording level of your DVD

recorder manually.

l In monitor mode, press AUTO/MAN REC

VOLUME on the DVD recorder.

‰ The display will show the current audio level and

MANUAL appears.

l Adjust the recording level with MANUAL 3 or 4

on the DVD recorder, so that the ‘0 dB’ mark lights

up during the loudest parts of the recording.

l You can switch back to automatic audio level control

by pressing AUTO/MAN REC VOLUME again.

‰ The display will show the current disc position

and

MANUAL disappears.

Recording with automatic switch-off (OTR

One-Touch Recording)

l Insert a recordable DVD+RW or DVD+R disc.

l Use CHANNEL 3 or CHANNEL 4 (on the

recorder) or CH+, CH- (on the remote control) to

select the programme number (programme name)

from which you wish to record.

l Press RECORD (on the recorder) or REC/OTR

(on the remote control) twice.

‰ A recording will be made of 30 minutes.

‰ The required end time of the recording is shown

in the timer box on screen. The remaining recording

time is shown on the display.

l Press RECORD or REC/OTR again to obtain a

30 minute increment.

l Shortly after pressing REC/OTR, OTR can be

cancelled by pressing CLEAR.

Timer programming

The DVD recorder needs the following information for

every programmed recording:

- the date on which the recording is to be made;

- the channel;

- the start and stop time of the recording;

- VPS/PDC on or off;

- the recording mode (HQ, SP, LP or EP).

The DVD recorder stores all the information mentioned

above in a timer block. You can programme up to six

timer blocks, one month in advance.

When you have programmed the timer, a red line on

the disc bar (both on the display and on the Index

Picture Screen) indicates what part of the disc will be

overwritten by the programmed recording from the

current disc position (on DVD+RW) or after the last

title (on DVD+R).

MONITOR ON/OFF

REC/OTR

PLAYSTOP FSS

FORWARDREVERSE

NEXT PREVIOUS

PAUSE SLOW

CLEAR

CHVOL

SELECT

TIMER

MUTE

T/C A/CH

CHANNEL

DVD RW

TITLE

CHAPTER TIME

REMAIN

-30-40 -10-20 0

OVER

-30-40 -10-20 0

OVER

STEREO

RECORD

MANUAL

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Comments to this Manuals

No comments

Philips DVDR980 User Manual Page 32

Comments to this Manuals

Related products and manuals for DVD players Philips DVDR980