Philips DVDR80 User Manual download pdf (Page 38)

9 Use a component video (Y Pb Pr) cable, connect the three cinch

sockets (red, blue, green) COMPONENT VIDEO OUT at the back

of the DVD recorder with the corresponding three component video

input sockets of your TV set, usually labelled 'Component Video

Input', 'YUV Input', 'YPbPr', 'YCbCr' or simply 'YUV'.

Warning!

Do not confuse these sockets with the five-component RGB sockets

(if available) or the yellow video (CVBS/FBAS) socket and the two

audio sockets (red/white). The five-component RGB sockets are only

provided for the R-G-B-H-V signals (red, green, blue with horizontal

and vertical synchronisation impulse).

Please observe the colour sequence

The colours of the sockets at the DVD recorder and the connectors must

match those of the socket colours at the TV set

(red-red/blue-blue/green-green). If they don't, the colours of the picture may

get mixed up or the picture may not be visible.

Tip

0 Use an audio (cinch) cable, connect the red/white cinch socket OUT

AUDIO L/R at the back of the DVD recorder with the mostly

red/white audio input socket of your TV set (usually labelled 'Audio in'

or 'AV in'. See the instruction manual of your TV set.)

A If necessary, switch your TV set to the component video input socket.

Also consult the instruction manual of your TV set.

B The menu of the DVD recorder should now appear on the TV

screen. If not, check the cable connections and the settings on your

TV set.

Manual TV channel search

In some cases, not all of the available TV channels may have been found and stored during initial

installation. In this case, you will need to search for and store the missing or coded TV channels

manually.

Manual search with EasyLink

With 'Easy Link', the DVD recorder will automatically download the TV

channels stored on the TV set. This is why some lines have no function. To

store new TV channels, they must first be stored on the TV set. The

information will then be transferred to the DVD recorder automatically.

Tip

1 Switch on the TV set. If required, select the programme number for

the DVD recorder.

2 Switch on the DVD recorder using STANDBY-ON m .

Installing your DVD recorder

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 119 120

No comments

Philips DVDR80 User Manual Page 38