Philips DVD795SA User Manual download pdf (Page 45)

Speakers 45

The Player lets you adjust the speaker settings, volume balance, and delay

time for your audio system. You only need to adjust the speaker settings

if you used the Player’s MULTICHANNEL AUDIO OUT jacks to connect

the Player to a six-channel Receiver (Dolby Digital or DTS) as shown on

page 15.

Press SYSTEM MENU. will be selected.

Press 9 repeatedly to select G , then press :.

Press 9 repeatedly to select Speakers, then press :.

Press 8 or 9 to select the speaker you want to adjust, then

press :. You can select Front L & R (left and right), Center,

Surround L (left), Surround R (right), or Sub Woofer. The speaker

you selected will be highlighted in the illustration at the right of the

screen.

Press : or ; to select B, , or X. Then, press 8 or 9

to adjust the chosen setting. When you are finished, press

OK to go back and select a different speaker. Repeat steps 4-5

until you are satisfied with all the speaker settings.

● Choose B to increase or decrease the volume of the speaker.

● Choose to adjust the frequency capabilities of your speakers.

Select L (large) if the chosen speaker can handle low frequency sig-

nals below 120 Hz. Select S (small) if the speaker can not reproduce

low frequency signals below 120 Hz. Select c (off) if you did not

connect that speaker. Your choice will appear below the bar at

the bottom of the screen. See your speakers’ literature for details on

speaker capability.

● Choose X to adjust the speaker delay time. You can adjust the

delay time for only the Center and Surround speakers.

If the surround speakers are about 150 centimeters nearer to the lis-

tening position than the front speakers, and the center speaker aligns

with the front speakers, no adjustment is needed.

If your speaker setup is different, adjust the delay times. First, mea-

sure the distance, in centimeters, from the front speaker to the lis-

tening position and from the surround speaker to the listening posi-

tion. Subtract the surround distance from the front distance, then

divide by 30. The result is the Surround speaker delay time in mil-

liseconds.

You may choose 0 ms, 5 ms, 10 ms, or 15 ms in the X column for

Surround L and Surround R. Press 8 or 9 to choose the delay time

in the X column for Surround L and Surround R that is closest to

the delay time you calculated in milliseconds (ms).

Or, if the Center speaker is closest to the listening position, measure

the distance (in centimeters) between the Front and Center speak-

ers, then divide by 30. The result is the Center speaker delay time in

milliseconds. Press 8 or 9 to select this delay time in milliseconds

(ms) in the X column for Center. You may choose 1-5 ms.

Press SYSTEM MENU to remove the menus.

POWER

REPEAT SHUFFLE SCANREPEAT

A-B

STOP

DISPLAY

RETURN

DISC SYSTEM

ANGLE ZOOM AUDIOSUBTITLE

PLAY

PAUSE

T-C

DISC DIM

SOUND MODE

2-5

1,6

Speakers

Front L & R

Center

Surround L

Surround R

Sub Woofer

OK to exit 0dB S 0dB

Z Y d

1en 1en 1 st

• For the Subwoofer, you cannot

adjust the frequency capabili-

ties. Simply choose n (On) or

c (Off) to identify whether

you connected a subwoofer (n)

or not (c).

• Your audio system may refer to

the Surround speakers as the

rear speakers.

• The Speaker settings are only

active during playback of a

DVD that has Dolby Digital 5.1

or DTS sound or of an SACD’s

Multi-channel layer.

The Speaker settings are not

active during playback of an

SACD’s Stereo layer or of other

Disc types.

• Volume level setting and delay

time are not applicable during

SACD playback.

Helpful Hints

1 ... 44 45 46 ... 56

Comments to this Manuals

No comments

Philips DVD795SA User Manual Page 45

Comments to this Manuals

Related products and manuals for DVD players Philips DVD795SA