Philips SpeechMike USB User Manual download pdf (Page 9)

9User manual

Use your SpeechMike4

This chapter describes how to use the

SpeechMike with Philips SpeechExec dictation

software. If the SpeechMike is used with third-

party software other than Philips SpeechExec,

some features may not be present or function

dierently. For detailed information, refer to the

documentation delivered with the software.

Create a recording4.1

The dictation microphone must be 1

connected to the computer with the USB

cable.

Start SpeechExec dictation software.2

Press the 3 d

RECORD key to create a new

recording and enter Record standby mode.

The recorder window is displayed.•

The record indicator light ﬂashes red (in •

overwrite mode) or green (in insert mode).

Press the 4 e key and start speaking.

The record indicator light glows in red (in

overwrite mode) or green (in insert mode) while

recording.

For short pauses, press the 5 e key. To

continue recording, press the e key again.

To stop recording, press the 6 d

RECORD key.

Press the 7

•EOL/••PRIO key to mark the

recording as ﬁnished.

The dictation ﬁle is moved to the • Finished

dictations folder.

The recorder window closes and the work list •

window is displayed.

To assign priority status to the recording, 8

press the

•EOL/••PRIO key again within half

a second.

D Note

For best results, speak clearly and keep the

microphone about 10 to 15 centimeters (4 to 6

inches) away from your mouth.

Use the bar-code scanner (LFH3300 4.2

only)

Press the scan button and scan the 1

barcode. When a barcode is recognized,

the SpeechMike will beep and the barcode

information is inserted into the currently

active application as if the barcode number

is typed in digit by digit.

D Note

The barcode scanner allows barcode scanning

from a distance of up to 30 cm / 12 inches.

ENGLISH

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Comments to this Manuals

No comments