Philips DVDQ40/022 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
9
English
Preparation
General Notes
Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
player. Use only one of the connections described below.
Please refer to the manuals of your TV, VCR, Stereo System
or other devices as necessary to make the best
connections.
For better sound reproduction, connect the player’s audio
out jacks to the audio in jacks of your amplifier, receiver,
stereo or audio/video equipment. See ‘Connecting to
Optional Equipment’.
Caution:
Make sure the DVD player is connected directly
to the TV. Set the TV to the correct video input
channel.
Do not connect the players audio out jack to
the phono in jack of your audio system.
Do not connect your DVD player to the TV via
your VCR. The DVD image could be distorted by
the copy protection system.
Connecting to a TV
Make one of the following connections, depending on the
capabilities of your existing equipment.
SCART connection
1 Connect the SCART to the corresponding connector on
the TV using the SCART cable supplied (Z).
If your TV is not equipped with a SCART you can select
one of the following alternative connections:
S-Video (Y/C) connection
1 Connect the Y/C S-VIDEO OUT jack on the DVD player to
the S-Video in jack on the TV using an optional S-Video
cable (Y).
2 Connect the Left and Right AUDIO OUT jacks of the DVD
player to the audio left/right in jacks on the TV (A).
CVBS connection
1 Connect the (CVBS) VIDEO OUT jack on the DVD player
to the video in jack on the TV using the video cable
supplied (X).
2 Connect the Left and Right AUDIO OUT jacks of the DVD
player to the audio left/right in jacks on the TV (A).
TV
Y
X
A
Z
IAL
OPTICAL
G
ITAL AUDIO OUT
C
M/MPEG2/AC-3/DTS
FRONT
MULTICHANNEL AUDIO OUT
FRONT
CVBS
AUDIO
OUT
S-VIDEO
SURROUND
SURROUND
L
R
CENTER
SUB WF
L
R
1
2
Y
P
b
/C
b
P
r
/C
r
VIDEO OUT
TV OUT
Component Video (Pr/Cr Pb/Cb Y)
connection
1 Connect either S-Video or CVBS video out jack to TV as
above diagram.
2 Turn on the TV and go to Personal Preference menu (see
Personal Preference).
3 Select the video output from RGB (default) to Pr/Cr Pb/Cb Y.
4 Connect the Pr/Cr Pb/Cb Y VIDEO OUT jacks on the DVD
player to the corresponding in jacks on the TV using an
optional Pr/Cr Pb/Cb Y cable (W).
5 Connect the Left and Right AUDIO OUT jacks of the DVD
player to the audio left/right in jacks on the TV (A).
TV
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
PCM/MPEG2/AC-3/DTS
FRONT
MULTICHANNEL AUDIO OUT
FRONT
CVBS
AUDIO
OUT
S-VIDEO
SURROUND
SURROUND
L
R
CENTER
SUB WF
L
R
1
2
Y
P
b
/C
b
P
r
/C
r
VIDEO OUT
TV OUT
W
A
PREPARATION
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Comments to this Manuals

No comments