Philips CE132 User Manual

www.philips.com/welcomeUser manualAlways there to help youRegister your product and get support atCE132Question?Contact Philips

8 EN2 Connect the antenna and amplier as illustrated, if applicable. Sockets on rear panelExternal sockets or connectors1 For ISO male connectorsA

9EN4 Slide the unit into the sleeve until you hear a "click". 5 Attach the trim plate. 6 Reconnect the negative terminal of the car batte

10 EN4 Get startedFor the rst time use1 Press to turn on the system. » [PHILIPS] is displayed and then [SELECT OPERATING REGION] (select a radio r

11EN2 Press / repeatedly to select a listening zone.Mute the button beepThe beep sound of buttons is enabled by default.1 Press and hold to ac

12 EN5 Listen to radioSelect a tuner regionYou can select a radio region that matches your location.1 In radio mode, press and hold to access the

13EN2 Tune to the radio station that you want to store.3 Press and hold , , , , , or to store the radio station at the selected channel.• To

14 ENUse alternate frequenciesIf the signal of an RDS station is poor, enable the AF (Alternate Frequency) function to search for another station that

15EN6 Play from a storage device 1 Connect a compatible USB storage device or SD/SDHC card.• For an SD/SDHC card, detach the front panel rst, i

16 ENSwitch folders for a track1 Press to access the folder list. » The name of current folder scrolls.2 Rotate to toggle through folders.3 Pre

17EN7 Listen to an external playerYou can use the system to amplify the audio input from an external player, for example, MP3 player. 1 Switch the

18 EN8 Adjust soundThe following operations are applicable to all supported media.Button FunctionRotate to increase or decrease the volume level.Pres

19EN9 Additional informationReset the systemIf the system works abnormally, reset the system to factory default settings. 1 Detach the front panel.2

20 EN10 Product InformationNote •Specications are subject to change without prior notice.GeneralPower supply 12 V DC (11 V - 16 V), negative groundFu

21EN11 TroubleshootingWarning •Never remove the casing of this product.To keep the warranty valid, never try to repair the product yourself. If you en

22 EN12 NoticeAny changes or modications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s author

23EN13 GlossaryMMP3A le format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Laye

Specifications are subject to change without notice© 2012 Koninklijke Philips Electronics N.V.All rights reserved.CE132_12_UM_V3.0

1ENContents1 Safety 22 Your car audio system 3Introduction 3What's in the box 3Overview of the system 43 Install the car audio system 7Con

2 EN1 SafetyRead and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does

3EN2 Your car audio systemCongratulations on your purchase, and welcome to Philips! To fully benet from the support that Philips offers, register yo

4 ENOverview of the system a • Unlock the front panel.b • For .wma and .mp3 tracks, press to select the previous folder.• Press and hold to access

5ENh • In radio mode, press to select the preset radio station of No. 5.• In radio mode, press and hold to store the current radio station at channe

6 ENs • Press to enable or disable the maximum volume.• Press and hold to enable or disable the DBB (dynamic bass boost) sound effect.t BAND• Pres

7EN3 Install the car audio systemCaution •Use the controls only as stated in this user manual.Always follow the instructions in this chapter in seque