Philips PT44434 User Manual download pdf (Page 19)

18

Check computer Connect the camera to

the PC with the USB

cable and select [My

Computer] – [Control

Panel] – [System] –

[Device Manager]. In

the [Device Manager]

window delete

[Compose USB

device] or [Unknown

device] in [Other

devices]. Then

disconnect the camera

and install the

software before

reconnecting the

camera to the PC.

Camera

malfunctions

during use

Electrostatic

discharge

interfered with

the camera

Check if the camera is

connected to the PC

Turn off the camera

and then turn it back

on. If connected to

the PC disconnect the

camera from the USB

cord, and turn it off

then on again.

LCD The LCD does

not light.

If you turn the power off

with the LCD off, the

LCD screen is still set to

OFF the next time the

power is turned on.

Press the LCD button

once to turn on the

LCD.

Everything on

the LCD

flashes and “7”

or “8” is

displayed

Camera

firmware defect

Sync firmware with PC If the “Camera

firmware is out of

sync. Update

recommended.

Update firmware?”

message appears when

you connect the

camera to your PC

with the USB cable,

click the [Yes] button

to update your

firmware.

LCD displays

“E2” when a

SD memory

card is inserted

Incompatible

file system on

SD memory

card

Format SD card See Deleting an

image/Formatting

flash memory or SD

card in section 3

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments