Philips CAM110 User Manual Page 1

CAM110Register your product and get support atwww.philips.com/welcomeEN User manual

102 Press + to enter the edit window.3 Press to enter the trim window.A bar for video trimming is displayed »at the top of the window.4 Press

11Settings menu optionDescription[Flash] Select a ashlight mode: [On], [Off] or [Auto].[Resolution] Select a video resolution: [Full HD] (for best vi

12Install and use the camcorder softwareWith the software (ArcSoft MediaImpression HD Edition) available in the internal memory of the camcorder, you

136 Technical specificationsProduct information is subject to change without prior notice.Image sensor 1/3.2” 8MP CMOS sensorOperation modes Movie re

147 Frequently asked questions (FAQ)Why is there no response when I use the camcorder?The camcorder is in power-off mode. •Turn on the camcorder (se

15a few seconds this will be corrected automatically by the camcorder.Can I connect the camcorder directly to TV, DVD/Blu-ray player or Home Cinema se

16Somevideolescannotbeedited.Whyisthat?Video les recorded with dual recording •cannot be edited. To edit video les on the camcorder, set [

17

© 2011 Koninklijke Philips Electronics N.V.All rights reserved.CAM110_00_UM_V1.0

3ENContents1 Important 4Safety 4Notice 42 Your camcorder 5Introduction 5What’s in the box 5Functional overview 63 Get started 7Load the Mic

4Notice This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high

52 Your camcorderIntroductionWith this portable camcorder, you can:take full HD (1080P) or VGA movies • take pictures• play recorded movies or pictur

6Navigate up/down in a menu.• Change a value in the settings menu.• During video play, change the • volume.Perform the specic function as • shown on

73 Get startedLoad the Micro SD card 1 Flap open the protective cover on the Micro SD card socket.2 Insert a Micro SD card (not supplied) into the

8TipSee ‘Use your camcorder - Adjust settings’ for more •settings.Select a scene1 In viewnder mode, press to enter the window for scene selection

94 Use your camcorderRecord video1 Switch the mode switch button to .The selected resolution and »remaining recording time are displayed on the di