Philips SLV4200/12 Service Manual download pdf (Page 11)

Getting started 11

- Switch on the Video source.

- Take these items:

• Receiver (B)

• Power adapter (E)

• Remote control of the video

source.

- Go to TV2.

1. Connect the receiver to the second

TV (TV2)

Plug the SCART cable of the receiver

(B) into the SCART port of TV2.

2. Connect the power adapter

a. Take the supplied power adapter

(E) to plug the connector into the

DC 9V power connector on the

Receiver (B).

b. Plug the adapter into the power

outlet.

c. The green LED on the front panel

should be on.

Note: if it is not the case, press the ON/

OFF switch on the back of the product.

3. Set the CHANNEL switch to the

same channel number as on the

transmitter (A).

3.4 Enjoy

All the operations listed on 3.1 and 3.3

should have been done.

1. Switch on TV2.

2. Switch on the receiver (B).

3. Select the correct SCART input on

TV2.

4. Point the remote control of the

video source to the receiver (B).

5. Operate the video source with its

remote control.

6. Check if TV2 shows the image of the

video source.

> The receiver is connected

correctly.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments