Philips - MX3660D User Manual download pdf (Page 12)

English

Step 2: Connecting the

speakers

Connect the supplied speaker systems using the supplied

speaker cables by matching the colors of the jacks and

speaker cables.

1 Press up (or down) the speaker’s jack and fully insert the

stripped portion of the speaker cable into the jack, then

release.

2 Connect the subwoofer’s audio input to the WOOFER

LINE OUT jack and the speakers as follows :

Speakers

- +

Front Left (FL) black white

Front Right (FR) black red

Center (C) black green

Surround Left (SL) black blue

Surround Right (SR) black gray

Notes:

– Ensure that the speaker cables are correctly connected.

Improper connections may damage the system due to short-

circuit.

– For optimal sound performance, use the supplied speakers.

– Do not connect more than one speaker to any one pair of

+/- speaker jacks.

– Do not connect speakers with impedance lower than the

speakers supplied. Please refer to the SPECIFICATIONS

section of this manual.

Step 3: Connecting a TV

IMPORTANT!

– There are various ways to connect the system

to a TV (as shown in the illustration), it depends

on the capabilities of your TV system.

●

To listen to the TV broadcast channels or VCR

playback through the home cinema sound

system

Use the supplied audio cables (white/red) to connect

AUDIO IN (TV or AUX) jacks to the corresponding

AUDIO OUT jacks on the TV, VCR or other audio/visual

components.

Before start operation, press TV/AV or AUX on the

remote control to activate the corresponding input source.

●

To view the DVD playback

Use the video cable (yellow) to connect the system’s

VIDEO OUT jack to the video input jack on the TV.

●

You can make an extra video connection with

one of the following options if your TV has the

same input connector

Option 1

Use the S-video cable to connect the system’s S-VIDEO

OUT jack to the S-Video input jack on the TV.

CONNECTIONS

Option 2

Use the component video cables (red/blue/green) (not

supplied) to connect the system’s Pr/Cr Pb/Cb Y jacks to

the corresponding Pr/Cr Pb/Cb Y input jacks on the TV.

IMPORTANT!

If S-VIDEO or Component video Pr/Cr Pb/Cb Y is

used for DVD playback connection, the system’s

VIDEO OUT setting will need to be set

accordingly. Details are on pages 12-13.

● If your TV only has an RF-style jack (Antenna In or

75 ohm)

You will need an RF modulator in order to view the

playback of DVD dics on your TV. Ask your dealer for

details on RF modulator availability and compatibility.

Follow the instructions provided with the RF modulator to

connect the DVD system to your TV

Connecting additional

components

● To connect additional components

Use the AUDIO OUT jacks

– for connecting to an amplifier, audio system or TV with

analog audio inputs.

– for connecting to a CD or Tape recorder to make an analog

recording.

Use the OPTICAL or COAXIAL jacks

– for connecting to an amplifier with DTS, Dolby Digital

decoder or CD recorder.

You will need to set the DVD system’s digital output to

“ALL” (refer to “Preparations - System setup (DVD)”).

Notes:

– MP3 audio is not available on the digital output.

– Digital recording is only possible on a CD or VCD.

– Always refer to the instruction manual of the connected

equipment to make an optimal connection.

– Some DVD discs have anti-copying devices, so you will not

be able to record the disc through a VCR.

Pr/Cr

Pb/Cb

COAXIAL IN

OPTICAL IN

DIGITAL OUT

WOOFER

LINE OUT

OPTICAL COAXIAL AUX TV

AUDIO IN

AUDIO

OUT

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

Comments to this Manuals

No comments

Philips - MX3660D User Manual Page 12

Comments to this Manuals

Related products and manuals for Acoustics Philips - MX3660D