Philips VR674CAT99 User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
Use only tapes with the mark. The use of other tapes may
result in poor picture quality and excessive deposits on the video
heads, which the warranty may not cover if damage occurs.
Remove any light adhesive stick-on notes from the video cassette
tape before putting the tape in the VCR. Removable labels can
jam the VCR.
The VCR requires periodic maintenance to maintain its excellent
performance. This VCR has an Automatic Head Cleaner.
However, you may have to replace the video heads eventually.
Only an authorized service center should perform this service.
Before Using Your VCR 5
Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom of the
remote control by pressing the tab, then lifting the lid.
2
Place two AA batteries inside the battery compartment
with their
+
and
ends aligned as indicated.
3
Replace the battery compartment lid.
Using the Remote Control
Point the remote control at the VCR, then press the VCR but-
ton before using the remote control to operate the VCR.
Point the remote control at the TV, then press the TV button
before using the remote control to operate the TV.
Point the remote control at the Cable Box or Direct Broadcast
System (DBS), then press the CBL/DBS button before using the
remote control to operate the Cable Box or DBS.
VCR maintenance
Video cassette tapes have record tabs to ensure you do not acci-
dentally erase recordings.
1
To prevent recording, break off the tab with a screwdriver.
2
To allow recording, cover the hole with cellophane tape.
Recording Prevention
1
2
1
2
3
Removing the Plastic Cover from the Front Panel
A thin, plastic cover may protect the front panel of your VCR.
Before using the VCR, lift a corner of the plastic, then peel it off.
Battery Safety
Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury or damage to the unit:
Install ALL batteries correctly, with the + and - markings on the
battery aligned as indicated on the unit;
Do not mix batteries, for example, old with new or carbon with
alkaline; and
Remove batteries when the unit will not be used for a long time.
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 63 64

Comments to this Manuals

No comments