Philips VP115CAT99 User Manual download pdf (Page 16)

Before playing a tape, make sure the VCP and TV are connected

(see pages six-11). Then, follow the steps below.

Turn on the TV. Set it to the same channel as the

CH3/CH4 switch on the back of the VCP.

Insert a tape in the VCP. The power will come on and play-

back will start automatically. The POWER light will appear on the

display panel of the VCP.

If the tape you want to play is already in the VCP, make sure the

VCP power is on, then press the PLAY button.

To stop playback, press the STOP button.

Press the REW(ind) button.

Press the EJECT button to eject the tape.

16 Playing

• Other playback options and features

are explained on pages 17-20.

• Moisture may condense inside the

unit when you move it from a cold

place to a warm place, after heating

a cold room, or when the humidity is

high. When moisture accumulates in

your VCP, the POWER light will blink

on the VCP and the symbol will

appear on the TV screen. If you try to

play a tape in a VCP in which mois-

ture has accumulated, the tape and

the VCP could be damaged. If the

POWER light is blinking, keep the

VCP power on (but do not play a

tape) for at least two hours. When

the POWER light stops blinking, it is

safe to play a tape.

Helpful Hints

Insert a tape in the VCP.

Turn on the TV. Set it to

channel 3 or 4.

Status Symbols/Real-time Tape Counter

A status symbol and the real-time tape counter will appear on the

TV screen for five seconds when you press certain function but-

tons (PLAY, FF, EJECT, etc.). Or, you may press the DISPLAY but-

ton on the remote control to see the status symbol or counter.

The meaning of each status symbol is given here.

The counter shows the elapsed playing time of the tape from the

point at which you set the counter to 0:00:00. The counter is

automatically reset to 0:00:00 when you first insert a tape.

If you want to refer to a particular point on a tape later, play the

tape to that point. Then, press the COUNTER RESET button on

the remote control to set the counter to 0:00:00 at that point.

Later, when you are searching for that particular point, press the

DISPLAY button so you can see the counter as you fast forward

or rewind the tape to the 0:00:00 point.

Example of status symbol

and counter during playback.

See details below.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

Comments to this Manuals

No comments

Philips VP115CAT99 User Manual Page 16

Comments to this Manuals

Related products and manuals for Video Philips VP115CAT99