Philips DVDR985A User Manual download pdf (Page 12)

12 Hookups (cont’d)

Connecting to a TV Only

TV has a yellow CVBS Video In jack

COMPONENT VIDEO PROG

SCAN

EXT 2

EXT 3 EXT 3

EXT 1 EXT 1/2

RC 6

Back of TV

(example only)

LEFT AUDIO IN

RIGHT AUDIO IN

LEFT AUDIO IN

RIGHT AUDIO IN

VIDEO IN

Antenna

or Cable TV

Signal

Connect your Antenna or Cable TV signal to the ANTENNA jack

on the rear of the DVD Recorder.

Connect the yellow VIDEO OUT (CVBS) (EXT 2) jack of the DVD

Recorder to the corresponding VIDEO IN jack on your TV. Use the

supplied video cable, which has a yellow stripe on the cable end.

Connect a supplied two-strand audio cable to the red and white

AUDIO OUT (EXT 1/2) left and right jacks on the DVD Recorder

and to the left/right AUDIO IN jacks on the TV. The supplied two-

strand audio cable has red and white stripes on the cable ends. Match the

cable stripe colors to the jack colors.

Connect the supplied power cord to the MAINS (AC Power) jack

on the rear of the DVD Recorder.

Connect the power cords of the DVD Recorder and the TV to a

power outlet.

Press the STANDBY-ON

button on the front of the DVD

Recorder to turn on the DVD Recorder. The STANDBY-ON light will

turn green.

If “TURN ON TV” appears on the display panel, you need to turn on your

TV and set it to the correct Video In channel. (See next step.) This is part of

the Initial Setup of the DVD Recorder. You cannot see the Initial Setup

screens until you turn on the TV and have it on the right Video In channel.

Turn on the TV power. Set the TV to the correct Audio/Video In

channel. Such channels may be called AUX or AUXILIARY IN,

AUDIO/VIDEO or A/V IN, EXT1 or EXT2 or External In, etc.

This is not

channel 3 or 4 as it might be when using a VCR. See your TV owner’s manual

for details. Or, go to your lowest TV channel and change channels down until

you see the DVD background picture or Initial Setup screen on the TV

screen.

The Initial Setup screen will appear the first time you turn on the Recorder. Go to

page 16 to continue.

• On the TV, the Video In jack is

usually yellow and might be

labeled video, CVBS, composite,

or baseband.

• If you plan to watch your TV

with the DVD Recorder off, con-

nect the supplied RF coaxial

cable to the Recorder’s TV jack

and to the RF IN or ANTENNA

IN jack (75 ohm) on your tele-

vision. This lets you watch chan-

nels at the TV normally when

the DVD Recorder is off and

will improve the reception at

your TV.

Helpful Hints

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 67 68

Comments to this Manuals

No comments

Philips DVDR985A User Manual Page 12

Comments to this Manuals

Related products and manuals for Video Philips DVDR985A