Philips DVD962SA User Manual download pdf (Page 46)

46 Speakers

POWER

REPEAT SHUFFLE SCANREPEAT

A-B

STOP

DISPLAY DIM

RETURN

DISC SYSTEM

ANGLE ZOOM AUDIOSUBTITLE

PLAY

PAUSE

FTS

T-C RESUME

SOUND MODE

1,6

1-5

The Player lets you adjust the speaker settings, volume balance, and delay time

for your audio system. You only need to adjust the speaker settings if you used

the Player’s MULTICHANNEL AUDIO OUT jacks to connect the Player to a

six-channel Receiver (Dolby Digital or DTS) as shown on page 14.

Press SYSTEM MENU, then press ; to select

Press 9 repeatedly to select q , then press :.

Press 9 repeatedly to select Speakers, then press :.

Press 8 or 9 to select the speaker you want to adjust, then press :.

You can select Front L & R (left and right), Center, Surround L (left), Surround

R (right), or Sub Woofer. The speaker you selected will be highlighted in the

illustration at the right of the screen.

Press : or ; to select B, , or X. Then, press 8 or 9 to adjust

the chosen setting. When you are finished, press OK to go back and

select a different speaker. Repeat steps 4-5 until you are satisfied with all

the speaker settings.

● Choose B to increase or decrease the volume of the speaker.

● Choose to adjust the frequency capabilities of your speakers.

Select L (large) if the chosen speaker can handle low frequency signals

below 120 Hz. Select S (small) if the speaker can not reproduce low fre-

quency signals below 120 Hz. Select c (off) if you did not connect that

speaker. Your choice will appear below the bar at the bottom of the

screen. See your speakers’ literature for details on speaker capability.

● Choose X to adjust the speaker delay time. You can adjust the delay time

for only the Center and Surround speakers.

If the surround speakers are about 150 centimeters nearer to the listening

position than the front speakers, and the center speaker aligns with the

front speakers, no adjustment is needed.

If your speaker setup is different, adjust the delay times. First, measure the

distance, in centimeters, from the front speaker to the listening position

and from the surround speaker to the listening position. Subtract the sur-

round distance from the front distance, then divide by 30. The result is the

Surround speaker delay time in milliseconds.

You may choose 0 ms, 5 ms, 10 ms, or 15 ms in the X column for

Surround L and Surround R. Press 8 or 9 to choose the delay time in the

X column for Surround L and Surround R that is closest to the delay time

you calculated in milliseconds (ms).

Or, if the Center speaker is closest to the listening position, measure the

distance (in centimeters) between the Front and Center speakers, then

divide by 30. The result is the required Center speaker delay time in mil-

liseconds. Press 8 or 9 to select this delay time in milliseconds (ms) in the

X column for Center. You may choose 1-5 ms.

Press SYSTEM MENU to remove the menus.

Speakers

Front L & R

Center

Surround L

Surround R

Sub Woofer

OK to exit 0dB L 4ms

V W X Y Z } a

1 2 1en off no off

DVD Only

• The Player automatically sets the

speakers if you set Analog out-

put to Dolby Surround. Details

are on page 45.

• For the Subwoofer, you cannot

adjust the frequency capabilities.

Simply choose n (On) or c

(Off) to identify whether you

connected a subwoofer (n) or

not (c).

• Your audio system may refer to

the Surround speakers as the

rear speakers.

Helpful Hints

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 55 56

Comments to this Manuals

No comments

Philips DVD962SA User Manual Page 46

Comments to this Manuals

Related products and manuals for Video Philips DVD962SA