Philips DVD737 User Manual download pdf

User Manual for Philips DVD737 upgrade disc

Introduction

This software can be used to upgrade Philips

DVD737 DVD-player to the latest status. After

you have completed the upgrade procedure,

your DVD-player will typically perform better.

What improvements are made depends on the

upgrade software you’re using as well as the

software that your DVD-player contained before

the upgrade.

Tools Required

You will need the following items:

• a personal computer

• a CD-R/RW drive and writing application

• a blank CD-R or CD-RW disc

How to download the software to your

computer

Right mouse button click on the file and click

‘Save Target As…’ to save the file into your PC.

NOTE: Please do not rename the original

filename, ‘dvd737.rom’.

How to make an upgrade disc

Write the downloaded file onto a blank CD-R or

CD-RW disc, using the following settings:

• File System CD-ROM ISO Level 2

• Mode 1/2/XA

• Character set ISO 9660

• Finalised, single session

• Write speed low

Finalised the disc. (The application may do this

automatically.)

NOTE: Packet writing application for drag &

drop copying cannot be used for

creating an upgrade disc. Use only a

dedicated CD writing application

allowing ‘disc at once’ recording.

No UDF setting as well.

Before you upgrade

It may be useful to write down the system

version information of your DVD-player before

you start the upgrade procedure, in case you

need to call service.

1 Press SYSTEM MENU on the remote control

¾ SETUP MENU window appears

2 Press  (stop).

3 Followed by  (previous).

4 Followed by  (next).

5 The software version will appear on the left

bottom corner of the SETUP MENU window.

DVD737 Software upgrade procedure

NOTE: Do not press any button and unplug

the mains during upgrade.

1 Connect the mains cord to the power plug.

Press STANDBY-ON button on the front panel

POWER button on the remote control

to activate the player.

2 Press

OPEN/CLOSE to open the disc tray.

3 Insert the upgrade CD-R disc, label side up.

4 Press

OPEN/CLOSE to close the disc tray.

5 First ‘READING’ appears on the display,

followed by ‘UPGRADE’. This stage of the

procedure takes less than 2 minutes.

¾ If the software was successfully

downloaded, the display will show

‘DONE’ within a few seconds.

NOTE: If the display shows ‘FAIL’, please

refer to Philips Service Center.

6 When the upgrade is completed the tray will

open automatically.

¾ Remove the disc immediately.

7 Unplug the mains cord from the power plug.

8 Reconnect the mains cord to the power plug.

9 Press STANDBY-ON button on the front panel

POWER on remote control to power up

the player.

¾ The player functions as normal.

Summary of Contents

Page 1

User Manual for Philips DVD737 upgrade disc Introduction This software can be used to upgrade Philips DVD737 DVD-player to the latest status. After

Comments to this Manuals

No comments

Philips DVD737 User Manual

Browse online or download User Manual for Unknown Philips DVD737. Philips DVD737 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Philips DVD737

Verwandte Produkte und Handbücher für Fernseher & Monitore Philips 241S4LYCS/00