Philips 42PFL5907 Manual download pdf (Page 7)

It is critical that the tension of the wires on the Mercury remains unchanged.

Changing the tension of the wires will damage the Mercury and void your warranty.

To ensure the tension remains unchanged from factory defaults, please note the following:

 NEVER open or close the Mercury lift manually (i.e. by hand).

Doing so may reduce the tension in the wires, causing them to bunch up on the tubular motor

and prevent the lift from raising or lowering properly. The wire may snap if this is the case.

 NEVER disconnect wires.

Doing so will cause the tension of each wire to become uneven/unbalanced, making the load

applied to the lifting mechanism uneven. This can cause the Mercury Lift to malfunction and

may cause the wires to snap.

PRE-INSTALLATION

Important Warning

Page 7

Safety / Failsafe

Catch: Used to ensure that one

cable does not give if the other

cable snaps.

Wire Spool: The wires

should never be crossed

over, otherwise the lift

will be damaged.

Motor Control Box

Ceiling Rod : 8mm Threaded

Rod to fasten Mercury to concrete

slab above ceiling.

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

No comments

Philips 42PFL5907 Manual Page 7