Philips 272P4QPJKEB/00 User Manual download pdf (Page 17)

4. PowerSensor™

How does it work?

• PowerSensor works on principle of

transmission and reception of harmless

“infrared” signals in order to detect

userpresence.

• When the user is in front of the monitor

the monitor operates normally, at the

predetermined settings that the user has set -

i.e. Brightness, Contrast, Color, etc.

• Assuming that the monitor was set to 100%

of brightness for example, when the user

leaves his seat and is no longer in front of the

monitor, the monitor automatically reduces

the power consumption up to 80%.

User present in front User not present

ttaW

Power consumption as illustrated above is for

reference purpose only.

Setting

Default settings

PowerSensor is designed to detect the presence of

the user located between 30 and 100 cm (12 and

40 inches) from the display and within ve degrees

left or right of the monitor.

Custom settings

If you prefer to be in a position outside the

perimeters listed above, choose a higher strength

signal for optimal detection efciency: The higher

the setting, the stronger the detection signal. For

maximum PowerSensor efciency and proper

detection, please position yourself directly in front

of your monitor.

• If you choose to position yourself more than

100 cm or 40 inches from the monitor use

the maximum detection signal for distances

up to 120 cm or 47 inches. (Setting 4)

• Since some dark colored clothing tends to

absorb infrared signals even when the user

is within 100 cm or 40 inches of the display,

step up signal strength when wearing black or

other dark clothes.

Hot key Sensor distance

Landscape/Portrait mode (for selective models)

Landscape mode

Portrait mode

Above illustrations are for reference purpose only,

may not reect the exact display of this model.

How to adjust settings

If PowerSensor is not operating correctly inside or

outside the default range, here’s how to ne-tune

detection:

• Customize the button to serve as

PowerSensor hot key. Refer “Customize your

own “USER” key section. (If your display is

with “Sensor” hot key, go to next step.)

• Press the PowerSensor hot key.

• You will find the adjustment bar.

• Adjust the PowerSensor detection adjustment

to Setting 4 and press OK.

• Test the new setup to see if PowerSensor

properly detects you in your current position.

• PowerSensor function is designed to work

in Landscape mode (horizontal position)

only. After PowerSensor turn on it, it will

automatically turn Off if the monitor is used

in Portrait mode (90 degree/vertical position);

it will automatically turn ON if monitor is

returned to its default Landscape position.

Note

A manually selected PowerSensor mode will

remain operational unless and until it is readjusted

or the default mode is recalled. If you nd that

the PowerSensor is excessively sensitive to nearby

motion for some reason, please adjust to a lower

signal strength.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 34 35

Comments to this Manuals

No comments

Philips 272P4QPJKEB/00 User Manual Page 17

Comments to this Manuals

Related products and manuals for TVs & monitors Philips 272P4QPJKEB/00