Philips 50PP 9202 User Manual download pdf

his section shows you how to make a basic TV connection

using a cable TV or antenna signal.

If you have cable TV service, you’ll simply connect the coaxial

cable lead-in from the cable TV company to your TV. If you intend

to connect a VHF/UHF antenna, you may need a 300- to 75-ohm

adapter, which is not supplied with your TV.

NOTE: You should be able to buy optional accessories such as a

VHF/UHF antenna or a 300- to 75-ohm adapter at most stores

that sell electronics. Or you can call our Customer Care Center

at 1-800-531-0039.

Connect the Cable TV or antenna signal to the

ANTENNA IN 75Ω jack on the rear of the TV.

NOTE: If you are using an antenna with a round coaxial

cable (75Ω), then you are ready to connect to the back of

the TV. If your antenna has a flat, twin-lead wire (300Ω),

you must first attach the antenna wires on a 300- to 75-

ohm adapter. Then push the round end of the adapter onto

the ANTENNA IN 75Ω jack on the rear of the TV.

Insert the TV’s power plug into the wall power outlet.

3135 035 20401

Rear-projection

HDTV Monitor

Rear-projection

HDTV Monitor

Quick Use and Setup Guide

MAKING BASIC TV CONNECTIONS

Twin-lead Wire

300- to 75-ohm

Adapter

Coaxial Cable

Lead-in from Antenna

Cable TV

Company

Rear of TV

Coaxial Cable

Lead-in from

Cable TV Company

Outdoor or Indoor Antenna

(Combination VHF/UHF)

VIDEO

S-VIDEO

VIDEO

S-VIDEO

AUDIO

G/Y

R/Pr

B/Pb

SYNC

AUDIO

HD INPUT-AV 4

INPUT-AV 2OUTPUT

INPUT-AV 1

ANTENNA IN 75Ω

The combination antenna receives normal

broadcast channels 2-13 (VHF) and 14-69 (UHF).

ONTENTS

Important Notice/Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Making Basic TV Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1–2

Operating the Television and Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .2–3

Using the Installation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–6

Using the Picture-in-Picture (PIP) Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . .6–7

Adjusting the Manual Converge Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

ANTENNA OR CABLE TV

EST VIEWING

he major benefit of this projection television is its large view-

ing screen. To see this large screen at its best, test various

locations in the room to find the optimal spot for viewing.

NOTE: Be sure to allow a free flow of air to and from the per-

forated back cover of the set.

To avoid cabinet warping, cabinet color changes,

and increased chance of set failure, do not place

the TV where temperatures can become excessively

hot—for example, in direct sunlight or near a

heating appliance.

Magnetic fields, such as those of external speak-

ers, may cause the picture to distort if the speak-

ers are placed too close to the television. Move

the magnetic field source away from the TV until

there is no picture distortion.

CABLES AND CONNECTORS

f you are new to making TV hookups, you may want to read

this section. (The cables and connectors discussed are not sup-

plied with your set. You can buy them at most stores that sell

audio or video products. Or call our Customer Care Center at

1-800-531-0039.)

This publication provides you with examples of basic connections.

See pages 6–15 in the Directions for Use manual for more infor-

mation and connection examples.

A 75-ohm coaxial cable connects signals

from an antenna or a cable TV company

to the antenna jack on the back of the TV.

Coaxial cables use “F” connectors.

A two-way signal splitter enables you to

take a single antenna or cable TV signal

and supply it to two different inputs.

A 300- to 75-ohm twin-lead

adapter accepts the antenna

cables (called twin-lead wires)

from an antenna, allowing you

to connect the antenna signal to

the TV.

Video and audio cables

with standard RCA

(phono) connectors con-

nect the video and audio

jacks of accessory

devices such as VCRs

and DVD players to the

jacks on the TV.

To simplify making connections, the connectors

are usually color coded. The jacks on your TV are

likewise color coded to match the colors of the

connectors. The coding is as follows: yellow for

video (composite) and red and white for the right

and left audio channels, respectively. Use an audio

cable with a white connector when making mono,

or nonstereo, connections. The connectors of

video cables used to connect component video or

RGB (high-resolution) jacks are often color coded

red, green, and blue. Component video connec-

tions provide you with the highest possible color

and picture resolution.

An S-Video cable connects

devices such as DVD players,

VCRs, or camcorders to your

TV. S-Video provides better picture performance

than regular (composite) video connections. S-

Video cables can be used only with S-Video-com-

patible accessory devices.

As an Energy Star®

Partner, Philips

Consumer Electronics

has determined this

product meets the

Energy Star® guidelines

for energy efficiency.

Energy Star® is a U.S.

registered mark. Using

products with the Energy

Star® label can save

energy. Saving energy

reduces air pollution and

lowers utility bills.

IMPORTANT

This owner's manual is used with several differ-

ent television models. Not all features (and draw-

ings) discussed in this manual will necessarily

match those found with your television set. This is

normal and does not require that you contact

your dealer or request service.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD DO NOT EXPOSE THIS UNIT TO

RAIN OR EXCESSIVE MOISTURE.

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Quick Use and Setup Guide

This section shows you how to make a basic TV connectionusing a cable TV or antenna signal.If you have cable TV service, you’ll simply connect the coa

Page 2 - TELEVISION AND R

PIP2135468790OKSWAPPIP CHDNUPFREEZESOUNDVOLCHMUTECCA/CHPOWERPICTURESTATUS/EXITMENU/SELECTPOSITIONTV DNUP1234567890SURFA/CHACCVCRUPDNTV/VCRACTIVECONTRO

Page 3 - REMOTE CONTROL (CONTINUED)

3PIP2135468790TVSWAP PIP CHDNUPFREEZESOUNDMUTESURFA/CHPOWERPICTURESTATUS/EXITPOSITIONVCRACCMENU/SELECTVOLCHTV/VCRACTIVECONTROL1SOUNDBALANCEAVLINCR . S

Page 4 - FEATURES

4TUNER MODE213TVSWAP PIP CHDNUPFREEZESOUNDMUTEPOWERPICTURESTATUS/EXITVCRACCMENU/SELECTVOLCHACTIVECONTROLINSTALLLANGUAGETUNER MODE AUTO PROGRAMCHANNEL

Page 5 - FEATURES (CONTINUED)

5USING THEINSTALLATIONFEATURES (CONTINUED)AutoChronSETTING TIME AUTOMATICALLYThe steps in this section tell you how to set AutoChron™ to down-load the

Page 6

6USING THEINSTALLATIONFEATURES (CONTINUED)NAMEThe channel NAME feature allows you to list the “call” lettersof your favorite stations beside their cha

Page 7 - HELPFUL H

7VIEWING PICTURESADJUSTING COLOR AND TINTThe Picture-in-Picture (PIP) COLOR and TINT controls allowyou to make fine-tune adjustments to the PIP pictur

Page 8 - CONVERGE CONTROLS

8ADJUSTING THEMANUALCONVERGE CONTROLSCONVERGE RED/BLUEConvergence is the correct lining up of the red and blue light paths onthe TV screen. If the pat

Related models: 60PP9202

Comments to this Manuals

No comments

Philips 50PP 9202 User Manual

Browse online or download User Manual for Projectors Philips 50PP 9202. Philips 50PP 9202 User Manual

Summary of Contents

Related models: 60PP9202

Comments to this Manuals

Related products and manuals for Projectors Philips 50PP 9202