Philips DVP3316/94 User Manual

Register your product and get support atwww.philips.com/welcome EN User manual DVP3316

10 Route audio to other devices Route the audio from this DVD player to other devices to enhance audio play. Connect multi channel receiver

11Connect to power outlet Warning Risk of product damage! Ensure that the •power supply voltage corresponds to the voltage printed on the back or the

12 Navigate the menu 1 Point the remote control directly at the remote sensor on this DVD player and select the desired function. 2

13Select menu display language 1 Press SETUP . » [General Setup] menu is displayed. 2 Select [OSD Language] , then press .

14 Note During play, when progressive scan mode is on •for both this DVD player and the TV, distorted picture may display. Turn off the progressive s

15 Tip If the password entry menu is displayed, you •have to enter the password before it can be played. If you pause or stop a disc for about 5 mi

16Change video play 1 Play a title. 2 Use the remote control to change the video play. Button Action AUDIO Selects an audio language or cha

17Quick skip play to a speci c time 1 During play, press INFO . The disc status menu is displayed. » 2 Select the current elapsed p

18Play music Note For some commercial audio disc, play may •resume from the point where it was last stopped. To start play from  rst track, press

19Play photo Play photo as slideshow This DVD player can play JPEG photos ( les with .jpeg or .jpg extensions). 1 Insert a disc that cont

20Play musical slideshow Play MP3 music  les and JPEG photo  les simultaneously to create musical slideshow. The MP3 and JPEG  les must be stored

21 4 Select a setting, then press OK . To return to the previous menu, • press . To exit the menu, press • SETUP . [OSD Lan

22 • [Center Speaker] / [Rear Speakers] Option Description [Large] Produce low frequency signal below 120 Hz. [Small] Cannot produce low fr

23 Video setup 1 Press SETUP . » [General Setup] menu is displayed. 2 Press to select [Video Setup] , then press .

24 Preferences Note Stop disc play before you can access to • [Preferences] . 1 Press SETUP . » [General Setup] menu is displa

25 1) Press the Numeric buttons to enter ‘0000’ or the last set password at [Old Password]  eld. 2) Enter the new password at [New Password

26 Care Caution Never use solvents such as benzene, thinner, •cleaners available commercially, or anti-static sprays intended for discs. Clean

27Audio performance DA converter: 24 bits, 192 kHz• Frequency response: • DVD: 4 Hz - 22 kHz (48 kHz); • 4 Hz - 44 kHz (96 kHz)

28Main unit Dimensions (w x h x d): 360 x 37 x 209 • (mm) Net Weight: approximately 1.3 kg• Power Power supply rating: 110 V -

29 Sound No sound. Ensure that the audio cables are • connected and the connected device is turned on to the correct input source. Play

3 Contents 1 Important 4 Safety and important notice 4 Trademark notice 5 2 Your DVD player 6 Feature highlights 6 P

30 10 Glossary A Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while th

31Visit us on web at www.philips.com/support orCall us on Tel. No.: 1860-180-1111 (BSNL / MTNL)* 011-6600-1111 (GSM / WLL)*

© 2009 Koninklijke Philips Electronics N.V.All rights reserved.sgptt_0915/94_1

4 Recycle notice This electronic equipment contains a large number of materials that can be recycled or reused if disassembled by a specialize

5 Trademark notice Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laborato

6 Region codes You can play discs with the following region codes. DVD region code Countries India 2 Your DVD player Congratula

7 Remote control a ( Standby-On ) Turns on the DVD player or switches • to standby mode. b ( Open/Close ) Opens or clo

8 n ( Stop ) Stops disc play.• o ( Play/Pause ) Starts, pauses or resumes disc play.• p INFO For discs, displays

9 Connect video cables Connect this DVD player to TV to view disc play. Select the best video connection that the TV can support. Option 1: