Philips VR900/07 User Manual download pdf (Page 19)

Removing a cassette number

Every cassette is stored with a number in the Tape Manager.

You can delete this cassette number from the Tape Manager,

so that you can use this cassette for special recording

functions (for instance, synchro edit or dubbing). You can

delete cassette numbers that you don’t need anymore to

create space for new cassettes.

a Press the TAPE MANAGER button on the remote control.

b Select the line ’REMOVE A CASSETTE NR.’. Confirm

by pressing C .

c Select the cassette you require by pressing the D or

C button and press OK .

TAPE MANAGER - TM

REMOVE A CASSETTE NR.

CASSETTE NUMBER XXX

WILL BE REMOVED

FROM THE MEMORY

________________________________

TO EXIT TO CONFIRM

PRESS TM PRESS OK

d Confirm the cassette number with the OK button.

DThe word ’CASSETTE NUMBER XXX REMOVED

FROM MEMORY’ will appear on the screen when

the cassette number has been removed.

DThe cassette will now be removed from the Tape

Manager.

Copying the Tape Manager memory

If you cannot or do not want to use your video recorder (VCR

A) any more, you can transfer the Tape Manager memory to

another video recorder (VCR B).

DVideo recorder (VCR B) must also be equipped with

the Tape Manager. The Tape Manager of VCR B

must be empty.

a Switch off VCR A and VCR B with the STANDBY m button.

Please note, that no cassette is inserted in either one of

the machines.

b Connect the EXT.1 AV 1 socket on VCR A to the

EXT.1 AV 1 socket on VCR B.

c On VCR A, press the RECORD n and PROGRAMME B

buttons at the same time.

d On VCR B, press the PLAY G and PROGRAMME B

buttons at the same time.

’TM’ will appear in the display.

DA search symbol will appear in the display while the

information is being copied. This may take a few

minutes.

e When the transfer is finished, the display will read ’OK’.

DIf ’NO E’ appears in the display on VCR B, there are

already some cassettes stored in the Tape Manager.

To end, press the STANDBY m button.

DIf ’NO D’ appears in the display on VCR B, there are

no cassettes stored in the Tape Manager on VCR A.

Finish with the STANDBY m button.

DIf ’ERR.’ appears in the display on VCR B, this means

that an error was detected during the information

transfer. Repeat the transfer starting with step a .

f When the transfer is finished, both video recorders will

switch off automatically. Remove the scart cable.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Comments to this Manuals

No comments

Philips VR900/07 User Manual Page 19

Comments to this Manuals

Related products and manuals for LED TVs Philips VR900/07