Philips 48PFT4100 User Manual download pdf (Page 20)

If new channels are found or if channels are updated or

removed, a message is shown at TV start up. The TV must be in

standby to automatically update channels.

To switch off the message at start up . . .

1. Press

and select

Setup

and press

2. Select

Channel settings

and press

3. Select

Channel installation

Channel update message

Off

To switch off the Automatic channel update . . .

1. Press

and select

Setup

and press

2. Select

Channel settings

and press

3. Select

Channel installation

Automatic channel update

Off

Start an update

To start an update yourself . . .

1. Press

and select

Setup

and press

2. Select

Search for channels

and press

3. Select

Update channels

and follow the instructions on screen.

The update may take a few minutes.

In certain countries, the Automatic channel update is done while

watching TV or any moment when the TV is in standby.

New channels

New channels added with the automatic channel update are

easy to find in the channel list

New

. The same new channels are

also stored in the

All

Radio

channel list.

New channels are kept in the channel list

New

as long as you

don't mark them as a favourite or tune to them.

Reinstall channels

You can search for and reinstall channels and leave all other TV

settings untouched. Alternatively, you can do a full new TV

installation.

If a child lock code is set, you will need to enter this code before

you can reinstall channels.

Reinstall channels

To reinstall the channels only . . .

1. Press

and select

Setup

and press

2. Select

Search for channels

Re-install Channels

and press

3. Select the country where you install the TV.

4. Select

Antenna (DVB-T)

Cable (DVB-C)

. The channel

search may take a few minutes. Follow the instructions on

screen.

Full installation

To redo a full TV installation . . .

1. Press

and select

Setup

and press

2. Select

TV settings

General settings

Reinstall TV

and

press

. The installation may take a few minutes. Follow the

instructions on screen.

Factory settings

Factory settings sets the TV back to the original TV settings for

picture and sound. To switch back to the original Factory

settings . . .

1. Press

and select

Setup

and press

2. Select

TV settings

General settings

Factory settings

and

press

3. Press

to confirm.

4. Press



, repeatedly if necessary, to close the menu.

Channel list copy

Introduction

Channel list copy is intended for dealers and expert users. In

some countries, Channel list copy is only availble for copying

satellite channels.

With

Channel list copy

, you can copy the channels installed on

one TV onto another Philips TV of the same range. With

Channel list copy, you avoid the time-consuming channel search

by uploading a predefined channel list on a TV. Use a USB flash

drive of minimum 1 GB.

Conditions

- Both TVs are from the same year range.

- Both TVs have the same hardware type. Check the hardware

type on the TV type plate on the back of the TV. Typically

noted as Q . . . LA

- Both TVs have compatible software versions.

Current version

You can check the current version of the TV software

with

Current software info

Setup

Software settings

Copy channel list

To copy a channel list . . .

1. Switch on the TV which has its channels installed. Plug in a

USB memory device.

2. Press

and select

Setup

and press

3. Select

TV settings

General settings

Copy channel

list

Copy to USB

and press

. To copy the channel list

from this TV, you might be asked to enter the Child lock code

you entered during the installation.

4. When copying is done, unplug the USB memory device.

Now you can upload the copied channel list onto another

Philips TV.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 48 49

Comments to this Manuals

No comments

Philips 48PFT4100 User Manual Page 20

Comments to this Manuals

Related products and manuals for LED TVs Philips 48PFT4100