& Connect the RF antenna cable 1 of the RF IN socket
of your other AV device.
é Connect the RF output of the AV device to the RF input
of the recorder 2.
“ Connect another RF cable 4 from the output OUT of
your recorder to the TV’s input 75 Ohm x jack.
‘ To obtain better picture quality, also connect the Video
or S-Video,Audio left and Audio right cables of both
devices to
AV1 (Y or S-VIDEO, AUDIO L and R,) 3
and to
AV2 (CVBS or S-VIDEO, AUDIO L and R) 5.
Notes:
- In case of mono equipment, only the left loudspeaker
reproduces sound. Use a mono to stereo adaptor (not
supplied) for sound reproduction via all internal
loudspeakers.
- When using the
S-VIDEO connector do not connect any
device to the
AV2 CVBS or AV1 Y input.
The
MONITOR OUT
connector can be used for a daisy chaining or to record programmes from your TV
6. Only when a recorder is connected to MONITOR OUT
it is possible to record a programme from
other devices connected to the TV.
See Record with your recorder, p. 20.
Recorder and other A/V devices
& Connect the RF Antenna cable 1 to the RF IN socket
of your recorder.
é Connect another RF cable 2 from the output OUT of
your recorder to the TV’s input 75 ø x jack.
“ Better playback quality can be obtained if you also
connect the Video,Audio Left and Right (only for stereo
devices) AV cables 3 to the
CVBS, AUDIO L and R
input jacks of AV2.
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable
with the
S-VIDEO input instead of connecting the
recorder to the
CVBS jack of AV2.
S-Video does not provide audio, so audio cables must
still be connected to provide sound.
Recorder (
VCR-DVD+RW)
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the
display. Keep a minimum distance of 0,5 m from the screen.
Connect Accessory Devices
Comments to this Manuals