Philips HTS3541 Specifications download pdf (Page 26)

26

Step 2: Update the software

Caution

•

Before you connect the USB ash drive to

your home theater, make sure that there is

no disc in the disc compartment, and the disc

compartment is closed.

1 Connect the USB ash drive to your home

theater.

2 Switch your TV to the correct source for

your home theater.

3 Press (Home), and then select [Setup].

4 Select [Advanced] > [Software Update] >

[USB].

5 Follow the instructions on the TV to

conrm the update.

» When the software update is complete,

the home theater automatically switches

off and restarts. If it does not, disconnect

the power cord for a few seconds, and

then reconnect it.

Note

•

When the software update is in progress, do

not turn off the power or remove the USB

ash drive.

Update software through USB

What you need

• A USB ash drive, with at least 75MB of

memory. The USB ash drive must be FAT

or NTFS formatted. Do not use a USB hard

drive.

• A computer with Internet access.

• An archive utility that supports the ZIP

le format (for example, WinZip® for

Microsoft® Windows® or Stuft® for

Macintosh®).

Step 1: Download the latest software

1 Connect a USB ash drive to your

computer.

2 In your web browser, go to www.philips.

com/support.

3 At the Philips Support website, nd your

product and locate the Software and

drivers.

» The software update is available as a zip

le.

4 Save the zip le in the root directory of

your USB ash drive.

5 Use the archive utility to extract the

software update le in the root directory of

the USB ash drive.

» The les are extracted under the UPG_

ALL folder of your USB ash drive.

6 Disconnect the USB ash drive from your

computer.

EN

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 34 35

Comments to this Manuals

No comments