Philips HTD3250 User Manual download pdf (Page 11)

10 EN

Set up EasyLink (HDMI-CEC

control)

This home theater supports Philips EasyLink,

which uses the HDMI-CEC (Consumer

Electronics Control) protocol. EasyLink-

compliant devices that are connected through

HDMI can be controlled by a single remote

control.

Note

• Depending on the manufacturer, HDMI-CEC is known

by many names. For information on your device, see

the user manual of the device.

• Philips does not guarantee 100% interoperability with

all HDMI-CEC devices.

Before you start

• Connect your home theater to the HDMI-

CEC compliant device through HDMI

connection.

• Make the necessary connections described

in the quick start guide, and then switch

the TV to the correct source for your

home theater.

Enable EasyLink

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Video], and then press OK.

4 Select [HDMI Setup] > [EasyLink Setup]

> [EasyLink] > [On].

5 On your TV and other connected devices,

turn on HDMI-CEC control. For details, see

the user manual of the TV or other devices.

• On your TV, set the audio output to

'Amplier' (instead of TV speakers).

For details, see the TV user manual.

EasyLink controls

With EasyLink, you can control your home

theater, TV, and other connected HDMI-CEC

compliant devices with a single remote control.

• [One Touch Play] (One-touch play): If one-

touch play is enabled, press (Standby-

On) on the remote control of your home

theater to wake up the TV from standby.

• [One Touch Standby] (One-touch

standby): If one-touch standby is enabled,

your home theater can switch to standby

with the remote control of the TV or other

HDMI-CEC devices.

• [Sys Audio Control] (System audio

control): If system audio control is enabled,

the audio of the connected device is

output through your home theater

speakers automatically when you play the

device.

• [Audio Mapping] (Audio input mapping):If

system audio control does not work, map

the connected device to the correct audio

input connector on your home theater.

(see 'Set up the audio' on page 10)

Note

• To change the EasyLink control settings, press

(Home), select [Setup] > [Video] > [HDMI Setup] >

[EasyLink Setup] > [EasyLink].

Set up the audio

If you cannot hear the audio output of a

connected device through your home theater

speakers, do the following:

• Check that you have enabled EasyLink

on all the devices, (see 'Set up EasyLink

(HDMI-CEC control)' on page 10)

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Video], and then press OK.

4 Select [HDMI Setup] > [EasyLink Setup]

> [Sys Audio Control] > [On].

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Comments to this Manuals

No comments