Philips HTB5260G User Manual download pdf (Page 34)

32 EN

Subwoofer

• Output power: 166 W RMS (10% THD)

• Impedance: 3 ohm

• Speaker drivers: 165 mm (6.5") woofer

• Dimensions (WxHxD):

237 x 293 x 308 mm

• Weight: 3.8 kg

• Cable length: 3 m

Speakers

• Output power:

2 x 166 W RMS (10% THD)

• Speaker impedance: 3 ohm

• Speaker drivers: 1 x 78mm (3”) woofer +

1 x 19mm (0.7”) tweeter

• Dimensions (WxHxD):

100 x 230 x 130 mm

• Weight: 0.79 kg/each

• Cable length: 3 m

Remote control batteries

• 2 x AAA-R03-1.5 V

Laser

• Laser Type (Diode): InGaN/AIGaN (BD),

AIGaInP (DVD/CD)

• Wave length: 405 +7 nm/-7 nm (BD),

655 +10 nm/-10 nm (DVD),

790 +10 nm/-20 nm (CD)

• Output power (Max. ratings): 20 mW (BD),

6 mW (DVD), 7 mW (CD)

8 Troubleshooting

Warning

• Risk of electric shock. Never remove the casing of the

product.

To keep the warranty valid, never try to repair

the product yourself.

If you have problems using this product, check

the following points before you request service.

If you still have a problem, get support at

www.philips.com/support.

Main unit

The buttons on the home theater do not

work.

• Disconnect the home theater from the

power supply for a few minutes, then

reconnect.

• Make sure that the touch buttons surface

is not in contact with any conductive

material, like water drop, metal, etc.

Picture

No picture.

• Make sure that the TV is switched to the

correct source for the home theater.

No picture on a TV connected through HDMI.

• Make sure that you use a High Speed

HDMI cable to connect the home theater

and TV. Some Standard HDMI cables do

not display properly for some images, 3D

video, or Deep Color.

• Make sure that the HDMI cable is not

faulty. If it is faulty, replace it with a new

cable.

• Press (Home) and then 731 on the

remote control to restore the default

picture resolution.

• Change the HDMI video setting, or wait

for 10 seconds for auto recovery (see

'Picture and video settings' on page 25).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Comments to this Manuals

No comments