Philips MCM279 User Manual download pdf (Page 23)

English

23

USB

CD Ripping - Recording disc files to a

USB device

MCM279 allows you to copy the music files or

spoken contents of a disc to the external USB

device. You can record one track, the whole disc

or even selected tracks through the Program

function.

1 Check the USB device has been properly

connected. (See Installation: Connecting an

additional appliance)

2 Insert a disc (audio CD or MP3 or WMA). If

desired, program the disc.

3 Press SOURCE once or more to select CD

(or CD on the remote control).

4 To record one file

a. Select the track you want to record

b. Press once or repeatedly USB REC until “RIP

ONE” appears, flashing.

➜ Disc playback will start automactially from the

beginning of the selected track.

4 To record all files

Press repeatedly USB REC until “RIP ALL”

appears, flashing.

➜ Disc playback will start automactially from the

beginning.

5 To stop recording, first press 9, then unplug the

USB device.

● In the rip-one mode, the playback will auto go to

the stop position after one track/file comes to an

end.

● During MP3 and WMA recording, make sure the

playback of the file you want to record is wholly

completed before manually stop recording. Or

any part of the file will not be recorded.

● During recording, if the memory of the USB

device runs out, playback will not continue.

1 Check the USB device has been properly

connected. (See Installation: Connecting an

additional appliance).

2 Press SOURCE once or more to select USB

(or USB on the remote control).

➜ The icon appears.

– NO AUDIO appears if no audio file is found in

the USB device.

3 Play the USB’s audio files as you do with the

albums/tracks on a CD (See CD).

Note:

– For compatibility reasons, the album/track

information may differ from what it is displayed

through flash players’ music management software.

– File names or ID3 tags will be displayed as ---

if they are not in English.

INFORMATION REGARDING USB DIRECT:

1. Compatibility of the USB connection on this

micro system:

a) This micro system supports most USB Mass

storage devices (MSD) that these devices

are compliant to the USB MSD standards.

i) Most common Mass storage class devices

are flash drives, memory sticks, jump

drives and etc.

ii) If you see a "Disc Drive" showing up on

your computer after you have plugged

the mass storage device into your

computer, most likely it is MSD compliant

and it will work with this micro system.

b) If your Mass storage device requires a

battery/power source, please make sure you

have a fresh battery in it or charge the USB

device first and then plug it into the micro

system again.

2) Supported Music type:

a) This device only supports unprotected music

with file extension: .mp3 .wma

b) Music bought from on-line music stores are

not supported because they are secured by

Digital Rights Management protection

(DRM).

c) File name extensions that ended with the

following are not supported: .wav; .m4a;

.m4p; .mp4; .aac and etc.

3) No Direct connection can be made from a

Computer USB port to the micro system even

you have either or both mp3 or wma file in your

-computer.

P001-P028_MCM279_12_Eng 5/16/08, 11:5523

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29

Comments to this Manuals

No comments