Philips MCD395/58 User Manual download pdf (Page 22)

22

English

Basic Functions

Switching the system on

● Press ECO POWER/STANDBY-ON B on

the front panel.

➜ The system will switch to the last selected

source.

● Press SOURCE repeatedly (or DISC,

TUNER, USB or AUX on the remote).

➜ The system will switch to the selected source.

Switching the system to Eco

Power Standby mode

● Press ECO POWER/STANDBY-ON B (or

B on the remote) in the active mode.

➜ The system enters Eco power standby (the

ECO POWER LED is on) or normal standby

with clock display.

● The volume level (up to a maximum volume

level of 12), interactive sound settings, last

selected mode, source and tuner presets will be

retained in the player's memory.

● If the system is normal standby with clock display,

press and hold ECO POWER/STANDBY-

ON B on the front panel for 3 seconds or

more to switch to Eco power standby or vice

versa.

Power-saving automatic standby

As a power-saving feature, the system will

automatically switch to Standby mode if you do

not press any buttons within 15 minutes after a

disc has stopped playing.

Sound Control

DBB, DSC and LOUDNESS sound features

cannot be activated at the same time.

DBB (Dynamic Bass Boost)

DBB enhances the bass response.

● Press LOUDNESS/DBB on the front panel or

press LOUD/DBB on the remote to enable/

disable DBB feature.

➜ Some discs might be recorded in high

modulation, which causes a distortion at high

volume. If this occurs, switch off DBB or reduce

the volume.

DSC (Digital Sound Control)

DSC provides a different type of preset sound

equalizer setting.

● Press DSC repeatedly to select: CLASSIC, JAZZ,

POP or ROCK.

LOUDNESS

LOUDNESS feature enables the system to

automatically increase the treble and bass sound

effect at low volume (the higher the volume, the

lower the treble and bass increase).

● Press LOUDNESS/DBB on the front panel or

press LOUD/DBB on the remote to enable/

disable LOUDNESS feature.

➜ icon appears/disappears after this feature

is enabled/disabled.

Volume control

Turn the VOL control on the front panel

clockwise or anticlockwise or press VOL +/- on

the remote to increase or decrease the volume

level.

➜ ”VOL XX” is displayed on the display panel.

“XX” denotes the volume level.

To listen through the headphone

● Connect the headphone plug to the n socket

on the front panel of the DVD player.

➜ The speakers will be muted.

To switch off the volume temporarily

● Press MUTE on the remote.

➜ Playback will continue without sound and

“MUTE” appears.

● To activate sound reproduction, you can:

– press MUTE again;

– adjust the volume controls;

– change source.

pg001-pg041_MCD395-58-Eng 4/6/10, 11:0022

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 40 41

Comments to this Manuals

No comments