Philips FX25 User Manual download pdf (Page 23)

21

English

EN

11 Troubleshooting

Warning

• Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair

the system yourself.

If you encounter problems when using this

apparatus, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips web site (www.

philips.com/support). When you contact Philips,

ensure that the apparatus is nearby and the

model number and serial number are available.

No power

• Ensure that the AC power plug of the unit

is connected properly.

• Ensure that there is power at the AC

outlet.

• To save power, the unit switches to

standby automatically 15 minutes after

a play reaches the end and no control is

operated.

No sound or poor sound

• Adjust the volume.

• Check that the speakers are connected

correctly.

• Check if the stripped speaker wires are

clamped.

Left and right sound outputs reversed

• Check the speaker connections and

location.

No response from the unit

• Disconnect and reconnect the AC power

plug, then turn on the unit again.

Remote control does not work

• Before you press any function button, rst

select the correct source with the remote

control instead of the main unit.

• Reduce the distance between the remote

control and the unit.

• Insert the battery with their polarities (+/–

signs) aligned as indicated.

• Replace the battery.

• Aim the remote control directly at the

sensor on the front of the main unit.

No disc detected

• Insert a disc.

• Check if the disc is inserted upside down.

• Wait until the moisture condensation at

the lens has cleared.

• Replace or clean the disc.

• Use a nalized CD or correct format disc.

Cannot display some les in USB device

• The number of folders or les in the USB

device has exceeded a certain limit. This

phenomenon is not a malfunction.

• The formats of these les are not

supported.

USB device not supported

• The USB device is incompatible with the

unit. Try another one.

Poor radio reception

• Increase the distance between the unit and

your TV or VCR.

• If the signal is too weak, adjust the antenna

or connect an external antenna for better

reception.

Clock/timer setting erased

• Power has been interrupted or the power

cord has been disconnected.

• Reset the clock/timer.

Timer does not work

• Set the clock correctly.

• Switch on the timer.

Music playback is unavailable on the system

even after successful Bluetooth connection.

• The device cannot be used with the unit

to play music.

The audio quality is poor after connection

with a Bluetooth-enabled device.

• The Bluetooth reception is poor. Move the

device closer to the unit or remove any

obstacle between the device and the unit.

1 2 ... 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments