Philips FWM576 Specifications download pdf (Page 26)

English

Clock/Timer

Timer setting

The system can switch on to CD, TUNER, or

USB mode automatically at a preset time,

serving as an alarm to wake you up.

IMPORTANT!

– Before setting the timer, ensure that the

clock is set correctly.

– The timer will always be switched on

after it has been set.

– The timer will not start if a recording is

in progress.

– The volume of the timer will increase

gradually from the minimum level to the

last tuned volume level.

1 Press and hold CLOCK•TIMER for more than

two seconds to select timer mode.

➜ The last timer setting starts flashing.

➜ TIMER starts flashing.

➜ The selected source will be lighted and

flashing.

2 Press CD, TUNER or TAPE to select the

desired source.

● Before setting timer, make sure the music source

has been prepared.

CD – Load the disc(s). To start from a specific

track, make a programme (refer to “CD

Operation - Programming the disc tracks”).

TUNER – tune to the desired radio station.

TAPE – load the prerecorded tape into tape

deck 2.

3 Press ALBUM-/+ 5 6 on the system

repeatedly to set the hour for the timer to start.

4 Press TITLE-/+ ¡ / ™ on the system

repeatedly to set the minute for the timer to

start.

5 Press CLOCK•TIMER to store the start time.

➜ TIMER remains on the display.

● At the preset time, the selected source will play.

To exit without storing the setting

● Press STOP 9 on the system.

Notes:

– When the preset time is reached and the

selected disc tray is empty, the next available disc

will be selected. If all the disc trays are not

available, Tuner will be selected automatically.

– During timer setting, if no button is pressed

within 90 seconds, the system will exit timer setting

mode automatically.

To deactivate the TIMER

● Press TIMER ON/OFF on the remote control.

➜ The display will show "OFF" and TIMER will

disappear from the display.

To activate the TIMER

● Press TIMER ON/OFF on the remote control.

➜ The last set timer information will be shown

for a few seconds and TIMER will appear on the

display.

Sleep timer setting

The sleep timer enables the system to switch to

standby mode automatically at a preset time.

1 Press SLEEP on the remote control repeatedly

to select a preset time.

➜ The selections are as follows (time in

minutes):

15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15 …

➜ "SLEEP XX" or "OFF" is displayed. "XX" is

the time in minutes.

2 When you reach the desired length of time, stop

pressing the SLEEP button.

➜ SLEEP is shown, except for "OFF" mode.

➜ The sleep timer is now set. Before the system

switches to standby mode, a countdown of 10

seconds is displayed.

"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"

™ "SLEEP"

To check the remaining length of time

after sleep timer is activated

● Press SLEEP once.

To change the preset sleep timer

● Press SLEEP again while the remaining sleep

timer is shown.

➜ The display will show the next sleep timer

options.

To deactivate the sleep timer

● Press SLEEP repeatedly until "OFF" is displayed,

or press STANDBY ON B.

pg001-pg029_FWM576-55-Eng 2006.11.27, 15:0226

1 2 ... 21 22 23 24 25 26 27 28 29 30

Comments to this Manuals

No comments

Philips FWM576 Specifications Page 26

Comments to this Manuals

Related products and manuals for Home audio sets Philips FWM576