Philips BTD5210/12 User Manual download pdf (Page 20)

18 EN

9 Other features

Set the alarm timer

This unit can be used as an alarm clock. You can

select DISC, FM, or USB as the alarm source.

Note

• Make sure that you have set the clock correctly.

1 In standby mode, press and hold TIME/

SLEEP for more than two seconds.

» "The hour digits are displayed and

begin to blink.

2 Press / (or+/-/) repeatedly to set the

hour, and then press TIME/SLEEP .

» The minute digits are displayed and

begin to blink.

3 Repeat step 2 to select the source, and

adjust volume.

Note

• If no button is pressed in 90 seconds, the unit exits

timer setting mode automatically.

To activate or deactivate the alarm timer:

• In standby mode, press TIME/SLEEP

repeatedly to activate or deactivate the

alarm.

» If the timer is activated, is displayed.

Tip

• If the disc/USB source is selected, but no disc is placed

or no USB connected, the unit switches to the tuner

source automatically.

Set the sleep timer

• To set the sleep timer, when the unit is

switched on, press TIME/SLEEP repeatedly

to select a set period of time (in minutes).

» When the sleep timer is activated,

is displayed.

To deactivate sleep timer:

• When the unit is switched on, press TIME/

SLEEP repeatedly until [SLP OFF] (sleep

off) is displayed.

» When the sleep timer is deactivated,

disappears.

Listen to an external device

You can listen to an external device through this

unit with an 3.5mm audio cable (not supplied).

1 Make sure that the external audio device is

connected to this unit.

2 Press AUX to select the AUX IN source.

3 Start to play the external device (see the

user manual of the external device).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 29 30

Comments to this Manuals

No comments

Philips BTD5210/12 User Manual Page 20

Comments to this Manuals

Related products and manuals for Home audio sets Philips BTD5210/12