10 EN
» [SET CLOCK] (set clock) scrolls on
the display, and then 12 or 24 hour
format blinks.
3 Press / repeatedly to select the
hour format.
4 Press CLOCK/SCAN to conrm.
5 Repeat steps 3-4 to set the hour and
minute respectively.
Note
•
If the system is idle for 10 seconds, it exits clock setting
mode automatically.
Turn on
Press .
» The system switches to the last
selected source.
Tip
•
To select another source, press SOURCE repeatedly or
the source selection buttons on the remote control.
Switch to standby mode
Press to switch the micro system to standby
mode.
» The clock (if set) appears on the
display panel.
Switch to ECO Power mode:
• Press and hold
for more than three
seconds.
Tip
•
The micro system switches to Eco Power mode after
15 minutes in standby mode.
• Press and hold to switch the micro system to ECO
standby mode if it is in working mode.
• Press to wake up the micro system from ECO
standby mode.
Switch between standby mode and Eco Power
mode:
• In standby/Eco Power mode, press and
hold
to switch the micro system to Eco
Power/standby mode.
Tip
•
The power indicator lights up red when the micro
system is in Eco Power mode.
Comments to this Manuals