Philips FW930R User Manual download pdf (Page 20)

English

CD RECORDER

Switching the system ON

1 Plug the power cord supplied into the

MAINS connector on the CD recorder,

then into a mains socket.

2 Press ON/OFF.

™ The recorder is now in Standby

mode.

3 Press any key to activate the recorder.

Notes:

– The CD recorder will automatically

adjust to the local mains voltage.

– When the CD recorder is in the 'OFF'

position, it is still consuming some

power. If you wish to disconnect your

player completely from the mains,

withdraw the plug from the AC outlet.

Inserting discs

1 Press OPEN/CLOSE to open the disc

tray.

2 Insert a CD, CDR or CDRW in the

appropriate recess in the tray, label side

up.

3 Press OPEN/CLOSE to close the tray.

™ “CLOSE“ lights up, followed by

“READING“ and the type of disc you

inserted appears on the display.

• If a CDR(W) is finalized it will show

on the display.

• If CD-text is available the TITLE/ARTIST

will scroll by.

Notes:

– Only Audio CDs will be accepted. If a

non-audio disc is inserted, the display

shows "

WRONG DISC

" .

– If you insert a blank or partly-recorded

CDR or unfinalized CDRW, the CD

recorder will calibrate the disc for

optimum recording. During this process

the display will first show

INITIALIZING

" and then the

number of audio tracks. Calibration can

take up to 25 seconds.

Recording

Important:

– If you want to play the recorded

CDR disc on any regular CD player,

it must first be finalized. See

finalizing discs.

– Finalized CDRW discs play only on

CDRW compatible CD players.

– For recording from CD-changers, do

not use Manual Recording.

– Only make analog recordings when

digital recording is not possible.

– If the disc already contains

recordings, the CD recorder will

automatically search for the end of

the last track, so that recording can

start from there.

– There must be at least 7 seconds of

recording time left on the disc,

otherwise you will not be able to

enter record standby mode. "

DISC

FULL

" then lights up.

– A maximum of 99 tracks can be

recorded on a disc. Minimum

allowable track length is 4 seconds.

AUTOSTART RECORDING

This feature enables you to make fast and

easy recordings of a CD. Track increments

are automatically detected from the source

material. Track increments cannot be added

manually. In analog source material a

silence of 2.7 seconds or more is

automatically detected as a track

increment.

Preparing for autostart recording

1 Make sure the disc is absolutely free of

scratches and dust particles.

2 Press SOURCE repeatedly to select

DIGITAL, OPTICAL or ANALOG mode.

™ The

DIGITAL I , OPTICAL I or ANALOG flag

lights up.

™ “DIGITAL 1, OPTICAL or

ANALOG” appears on the display.

3 Press REC TYPE

once

to record a

complete disc; or

twice

to record a

single track; or

four times

to record a

complete disc with Auto-Finalize

function selected.

™ The

SYNC flag starts flashing.

™ “RECORD DISC, RECORD

TRACK or MAKE CD” appears on

the display.

Start autostart recording

1 Start playback on the selected source.

™ The CD recorder automatically starts

to record.

• To check the elapsed recording time,

press DISPLAY.

• The recorder will stop automatically at

the end of recording.

2 To stop recording manually, press STOP

Çon the CD Recorder.

™ The

SYNC flag disappear and the

display shows “WAIT” .

• If STOP Ç was pressed within 3

seconds after starting playback, no

recording will take place.

• To interrupt recording, press PAUSE ;

on the CD Recorder.

• To resume recording, press RECORD on

the CD Recorder.

After recording, the display will show

“UPDATE“ for several seconds.

Note:

– Recordings from DAT, DCC or analog

sources will only stop after 20 seconds

silence.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 32 33

Comments to this Manuals

No comments

Philips FW930R User Manual Page 20

Comments to this Manuals

Related products and manuals for HiFi systems Philips FW930R