Philips SHB4385BK/00 User Manual download pdf (Page 8)

6

EN

Pair the headset with

your Bluetooth device at

the rst time

1

Make sure that the headset is fully

charged and powered o.

2

On both earpieces, press and hold

the multi-function buttons for

approximately 3 seconds.

» The LED on both earpieces

ashes in white for 3 times; and

then it ashes in blue.

» Both earpieces are now

powered on and are paired with

each other.

» The headset is now in pairing

mode and is ready to pair with a

Bluetooth device (e.g. a mobile

phone).

3

Turn on the Bluetooth function of

your Bluetooth device.

4

Pair the headset with your

Bluetooth device. Refer to the user

manual of your Bluetooth device.

Note

• After powering on, if the headset cannot nd

any previously connected Bluetooth device, it

will automatically switch to pairing mode.

The following example shows you how

to pair the headset with your Bluetooth

device.

1

Turn on the Bluetooth function

of your Bluetooth device, select

Philips SHB4385.

2

Enter the headset password

"0000" (4 zeros) if prompted. For

those Bluetooth devices featuring

Bluetooth 3.0 or higher, no need to

enter a password.

Philips SHB4385

SHB4405

Pair the headset with

another Bluetooth device

If you have another Bluetooth device

that you want to pair with the headset,

make sure the Bluetooth function in any

other previously paired or connected

devices are turned o. Then follow the

steps in ‘Pair the headset with your

Bluetooth device at the rst time’.

Note

• The headset stores up to 2 devices in the

memory. If you try to pair more than 2 devices,

the earliest paired device is replaced by the

new one.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 16 17

Comments to this Manuals

No comments