User’s Manual forCordless Telephone withCaller ID/Call Waiting 9125Part 2Please read Part 1 — Important ProductInformation, included in your package.L
8Making a Call1 Press and release P, and wait for a dial tone. The screen displaysPHONE ON.2 When you hear a dial tone, dial the number.— OR —1 Enter
9Handset Ringer SelectionYou can select from four different handset ringer styles. You can also turn offthe ringer.1 Make sure the handset is off.2 P
10Special Telephone ServicesIf you subscribe to special local telephone company services like Call Waitingor Call Forwarding, you can access them by p
11OPERATING RANGEThis cordless telephone operates at the maximum power allowed by theFederal Communications Commission (FCC). Even so, this handset a
12TELEPHONE MEMORYThis cordless phone can store 20 telephone numbers that you can dial justby pressing m and two number buttons.Storing Memory Numbers
13CALLER ID OPERATIONAbout Caller IdentificationThis telephone is designed to store and display information about incomingcalls. It must be used with
14CALLER ID OPERATIONReviewing Call History1 Press and release C. The screen displays CALL #01 and the nameof the most recent caller.2 Press 7 to dis
15BATTERIESCAUTION: To reduce the risk of fire or injury to persons or damageto the telephone, read and follow these instructions carefully.• Use onl
16BATTERIESCharging the Spare Battery PackThe Spare Battery Charging Compartment is located in the base cradle. Youcan use the spare battery pack to
17IN CASE OF DIFFICULTYIf you have difficulty operating this phone, try the suggestions below. If youstill have trouble, call 1 800 PCC–9125.If the p
© 1998 Philips Consumer Communications L.P. All rights reserved.Printed in China. 848116232 Issue L1Lucent 9125 cover.L1 4/8/98, 11:30 AM2
18IN CASE OF DIFFICULTYIf the phone does not ring when you receive a call:• Make sure the handset ringer is on.• Make sure the telephone line cord is
1CONTENTSINSTALLATION... 3Table/Desk Installation... 3Wall Installation...
2Lucent 9125 book.L1 4/8/98, 11:24 AM2
3INSTALLATIONTable/Desk Installation1 Choose a spot near an electrical outlet and a telephone jack.This phone requires a modular telephone jack and a
44 Connect the telephone line cord.Plug one end of the telephone line cord into the jack on the back ofthe base. Plug the other end of the line cord
5INSTALLATION3 Connect the power cord.• Plug the power adapter into the jack labeled 11V DC on theback of the base.• Run the cord under the tab on the
6TELEPHONE OPERATIONLatch forSpare BatteryCompartmentLight goes on when spare battery (optional) isplaced in Spare Battery CompartmentLight goes on wh
7TELEPHONE OPERATIONHeadset jackHandset VolumeControlEnd a callPut caller on hold /Store a pause in amemory numberMake or answera call / Access custom
Comments to this Manuals