Philips Frullatore ad immersione User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
Note: If the ingredients stick to the wall of the bowl, release the button to switch off the appliance and
loosen the ingredients with a spatula or add some liquid.
Note: Always let the appliance cool down after chopping meat with the blade unit.
9 After processing, press the lid release button on the bowl (1) and then turn the lid clockwise
to remove it (2). (Fig. 10)

- The appliance chops very quickly. Use the normal speed button or the turbo speed button. If
you use the turbo speed button, use it briey to prevent the food from becoming too nely
chopped.
- Do not let the appliance run too long when you chop (hard) cheese or chocolate. Otherwise
these ingredients become too hot, start to melt and turn lumpy.
- Do not use the blade unit to chop very hard ingredients like coffee beans, turmeric, nutmeg and
ice cubes, as this may cause the blade to get blunt.

The ne/medium slicing disc and the shredding/granulating disc are intended for slicing and
shredding vegetables like cucumber, carrots, potatoes, leeks and onions and certain kinds of cheese.
One side of the slicing disc is intended for ne slicing and the other for medium slicing. One side of
the shredding/granulating disc is intended for shredding and the other for granulating. Simply turn
the disc to switch between the two functions of each disc.
Never process hard ingredients like ice cubes with the discs.
The cutting edges of the discs are very sharp. Do not touch them.
1 Place the tool holder in the bowl (Fig. 6).
2 Place the ne/medium slicing disc or the shredding/granulating disc on the tool holder with
the desired side pointing upwards (Fig. 11).
3 Put the lid on the bowl (1). Turn the lid anticlockwise (2) to x it (‘click’) (Fig. 8).
4 Put the ingredients in the feeding tube.
- Pre-cut large ingredients into chunks that t in the feeding tube.
- Fill the feeding tube evenly for the best results.
- When you have to process a large amount of ingredients, process small batches and empty the
bowl between batches.
- To shred cheese, e.g. Parmesan, Gouda or Emmentaler, the cheese should be at refrigerator
temperature.
5 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 9).
6 Press and hold the normal or turbo speed button to switch on the appliance.
7 Press the pusher lightly onto the ingredients in the feeding tube.

The whisk is intended for whipping cream, whisking egg whites, desserts etc.
1 Connect the whisk to the coupling unit (Fig. 12).
2 Connect the coupling unit to the motor unit (‘click’) (Fig. 13).
3 Put the ingredients in a bowl.
 9
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 87 88

Comments to this Manuals

No comments