Philips DVDR3400 User Manual Page 67

  • Download
  • Add to my manuals
  • Print
  • Page
    / 78
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 66
English
67
Problem (General) Solution
Troubleshooting (continued)
A TV channel installed
during the DVD
recorder’s automatic TV
channel search is fuzzy or
distorted.
Unable to eject disc tray.
The contents of the USB
ash drive cannot be
read.
Slow operation of the
USB  ash drive.
No HDMI audio output.
No HDMI video output.
No display on the TV
screen.
Check the video connection between the DVD recorder
and the TV.
You can further  ne-tune the signal of the TV channel.
Read chapter on “DVD Setup Menu Options -
CHANNEL SETUP Settings – Modify Channel
Information.”
Press P +/– to search for the same TV channel which
may have a clearer picture.
Exit from any system or recording setup menu until you
see the Philips wallpaper on the screen.
Press STOP to stop any playback or recording. Then
press EJECT on the set or press OPEN/CLOSE on the
remote control to eject the disc tray.
The USB  ash drive format is not compatible with the
system.
Drive is formatted with a different  le system which is
not supported by this DVD system (e.g. NTFS).
Large  le size or high memory USB  ash drive takes
longer time to read and display on the TV.
You will not hear any sound from the HDMI output if
the source device is only DVI/HDCP (High-bandwidth
Digital Content Protection)-compatible.
It is not possible to output SACD or copy-controlled
DVD-Audio sources from the HDMI connection.
HDMI connection can only be made to HDMI-equipped
devices with HDCP (High Bandwidth Digital Content
Protection). If you wish to connect to a DVI connector
(equipped with HDCP), you will need a separate adaptor
(DVI to HDMI).
Make sure the resolution of this DVD system matches
the device you have connected using the HDMI. See
HDMI setting.
When the HDMI and the scart/ S-Video/Video(CVBS)
sockets are used to connect to a TV at the same time,
there may be no picture output from the video
connection. Disconnect the HDMI cable from the TV.
Page view 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 77 78

Comments to this Manuals

No comments