Philips 28PW6006/25 User Manual download pdf (Page 14)

Tips

Glossary

Poor reception

The proximity of mountains or high buildings

may be responsible for ghost pictures, echoing

or shadows. In this case, try manually adjusting

your picture: see Fine Tuning (p.5) or modify

the orientation of the outside aerial.

Does your antenna enable you to receive

broadcasts in this frequency range (UHF or

VHF band)?

In the event of difficult reception (snowy

picture) switch the NR on the

Features menu

to ON.(p.6).

No picture

If the television does not switch on, please

press the standby key

b (located on the

remote control) twice.

Have you connected the aerial socket properly?

Have you chosen the right system? (p. 5).

Poorly connected euroconnector cables or

aerial sockets are often the cause of picture or

sound problems (sometimes the connectors

can become half disconnected if the TV set is

moved or turned). Check all connections.

Peripheral equipment gives a black and

white picture

You have not selected the right socket with

the

n key: S-VHS2 (S-VHS3) instead of

EXT2 (EXT3).To play a video cassette, check

that it has been recorded under the same

standard (PAL, SECAM, NTSC) which can be

replayed by the video recorder.

The remote control no longer works.

Check that the mode selector on the side of

the remote control is set to TV.

No sound

If on certain channels you receive a picture

but no sound, this means that you do not have

the correct TV system. Modify the System

setting (p. 5).

Teletext

Are certain characters not displayed

correctly? Check that the Country setting

has been positioned correctly (p.5).

Remote control

The TV set does not react to the remote

control; the indicator on the set no longer

flashes when you use the remote control?

Replace the batteries.

Standby

When you switch the TV set on it remains in

standby mode and the indication Locked is

displayed when you use the keys on the TV set?

The Child Lock function is switched On (p. 7).

If the set receives no signal for 15 mins, it

automatically goes into standby mode.

To save power, your set is fitted with components

that give it a very low power consumption when

in standby mode (less than 3 W).

Still no results?

If your TV set breaks down, never attempt to

repair it yourself: contact your dealer's after-

sales service.

Cleaning the set

Only use a clean, soft and lint-free cloth to

clean the screen and the casing of your set.

Do not use alcohol-based or solvent-based

products.

RGB Signals: These are 3 Red, Green and Blue video signals which directly drive the red, green and

blue emitters in the cathode ray tube. Using these signals provides better picture quality.

S-VHS Signals: These are 2 separate Y/C video signals from the S-VHS and Hi-8 recording standards.

The luminance signals Y (black and white) and chrominance signals C (colour) are recorded

separately on the tape.This provides better picture quality than with standard video (VHS and 8

mm) where the Y/C signals are combined to provide only one video signal.

NICAM sound: Process by which digital sound can be transmitted.

System: Television pictures are not broadcast in the same way in all countries.There are different

standards: BG, DK, I, and L L’.The SYSTEM setting (p. 6) is used to select these different standards.

This is not to be confused with PAL or SECAM colour coding. Pal is used in most countries in

Europe, Secam in France, Russia and most African countries.The United States and Japan use a

different system called NTSC.The inputs EXT1 and EXT2 are used to read NTSC coded recordings.

16:9: Refers to the ration between the length and height of the screen.

Wide screen televisions have a ration of 16/9, conventional screen TV sets have a ration of 4/3.

1 2 ... 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Philips 28PW6006/25 User Manual Page 14

Comments to this Manuals

Related products and manuals for CRT TVs Philips 28PW6006/25