©2018 Koninklijke Philips N.V.
All rights reserved.
4239 001 06393
EN Note: Clean the appliance and wipe any deposits o the steamer
head with a damp cloth and non-abrasive liquid cleaning agent.
Always empty the water tank after usage, to prevent calc build-up
and maintain good steam performance.
SC
注意：用湿布和非腐蚀性液体清洁剂清洁本产品，并擦去
蒸汽喷头中的沉积物。
使用后务必将水箱倒空，以防止水垢的形成并保持良好的
蒸汽性能。
_ 10 mins.
_ 10 ܳ䧌
2
5
3 4
1
6 7
GC512 GC516, GC522
EN Problem Possible cause Solution
The appliance
produces no steam
or irregular steam.
The steamer has
not heated up
suciently.
Let the appliance heat
up for approximately
45 seconds.
Steam has
condensed in the
hose.
Lift the steamer head
to straighten the hose
vertically. This allows
any condensation to
ow back.
Low water level in the
tank or the tank is not
inserted properly.
Rell the water tank
and insert it properly.
Too much scale
has built up in the
appliance.
Perform calc-clean
process. Refer to
section.
Water droplets drip
from the steamer
head or the
appliance produces
a croaking sound.
You have left the
steamer head and/or
the steam supply hose
in horizontal position
for a long time.
Lift the steamer head
to straighten the hose
vertically. This allows
any condensation to
ow back.
When the hose
forms a U-shape,
condensation in the
hose cannot ow back
into the water tank.
Lift the steamer head
to straighten the hose
vertically. This allows
any condensation to
ow back.
An excessive
amount of water
drips out of the
steamer head when
the appliance is
heating up.
The water in the
appliance is dirty or
has been left inside
the appliance for a
long time.
Perform calc-clean
process. Refer to
section.
Water leaks out
from the steamer
base.
You have not closed
the water tank cap
or de-calc knob
securely.
The water tank is not
inserted properly.
Close the water tank
cap or de-calc knob
securely.
Insert the tank
properly.
User manual
用户手册
GC512, GC516,
GC522
4 53
> 1 hour
> 1 ᄼᬣ
2
1
GC512 GC516, GC522
EN To maintain optimal steam performance and prolong the lifetime of
the appliance, it is important to remove scales and impurities inside
the appliance regularly. Therefore, it is recommended to perform
the de-calc process at least once a month.
Before you start de-calc process, make sure there is some water in
the water tank.
SC
为了保持良好的蒸汽熨烫性能并延长产品的使用寿命，
定期去除产品内部的水垢和杂质是很有必要的。因此，
建议您至少每月执行一次除垢流程。
开始执行除垢流程之前，请确保水箱中留有一些水。
4
3
21
EN Caution: Do not attach or detach the brush/pleat maker while the
steam is on or the steamer head is hot.
SC 小心：蒸汽已打开或蒸汽喷头很烫时，不要安装或拆卸
毛刷
/
衣裤褶线夹。
EN Put the glove on the hand you are using to hold a garment. The
glove protects your hand against the steam from the steamer head.
SC
将防烫手套戴在拿着衣物的手上。防烫手套可保护您的手
不被蒸汽喷头所喷出的蒸汽烫伤。
1 2
3 4
GC516
GC522
SC 问题 可能的原因 解决方法
产品无法产生
蒸汽或产生的
蒸汽不连贯。
蒸汽挂烫机未充
分加热。
让产品加热约
45
秒。
有蒸汽凝结在输
送管内。
提起蒸汽喷头以垂
直拉直蒸汽输送
管。这样做可使冷
凝水流回水箱中。
水箱中的水位低或
水箱未正确插入。
为水箱加水并正确
装入。
产品内积聚的
水垢太多。
执行除垢过程。
请参阅
部分。
水滴从蒸汽
喷头上滴下
或产品发出
咕噜声。
蒸汽喷头和
/
或蒸
汽输送管水平摆
放了较长时间。
提起蒸汽喷头以
垂直拉直蒸汽输送
管。这样做可使冷
凝水流回水箱中。
当蒸汽输送管处
于
U
形状态时，
输送管内的冷
凝水不能流回
水箱中。
提起蒸汽喷头以垂
直拉直蒸汽输送
管。这样做可使冷
凝水流回水箱中。
产品加热时
有过多的水
从蒸汽喷头
中滴出。
产品中的水变脏
或留在产品很长
时间。
执行除垢过程。
请参阅
部分。
蒸汽挂烫机底
座漏水。
水箱盖未盖好
或除垢旋钮未
拧紧。
水箱未正确插入。
盖好水箱盖或拧紧
除垢旋钮。
请正确插入水箱。
产品： 飞利浦蒸汽挂烫机
型号： GC512, GC516, GC522
额定电压： 220 V～
额定频率： 50 Hz
额定输入功率： 1600 W
生产日期： 请见产品本体
产地： 中国浙江慈溪
飞利浦（中国）投资有限公司
上海市静安区灵石路718号A1幢
全国顾客服务热线: 4008 800 008
本产品根据国标 GB4706.1-2005,
GB4706.84-2007 制造
保留备用
发行日期：
2018-03-02
(44 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals