Philips AJ 3240/00 User Manual download pdf (Page 4)

installation

Radio/Clock

m

3

<a

E)'

3-

BUTTONS

RADIO

0 RADIO switch

- ON - the radio is switched on

- OFF - the radio is switched off

0 ALARM switch 2:

- OFF - alarm off

- RADIO - for waking up by radio

- BUZZER - for waking up by buzzer

0 ALARM switch 1:

- OFF - alarm off

- RADIO - for waking up by radio

- BUZZER - for waking up by buzzer

0 TIME - to set the time

© ALARM 1 - to set alarm time 1

® FAST UP - fast forward

© ALARM 2 - to set alarm time 2

® SLOW DOWN - slow backward

@ RADIO ON/SLUMBER - To switch on the

radio

® CLOCK DISPLAY with ALARM- and PM-

indicator (not for all versions)

® BATTERY Compartment

@ VOLUME control - for adjusting the volume

® TUNING dial - for locating the required station

@ BAND switch - for selecting wavebands

® SLUMBER OFF / REPEAT ALARM button;

- To switch off alarm temporarily

- To switch off the radio

MAINS CONNECTION

Check if the mains voltage as shown on the

type plate on the base of the set corresponds

to your local mains supply.

If it does not, consult your dealer or service

organisation.

As soon as you insert the mains plug into the

wall socket, the figures on the display @ will

blinlc. This means that you must set the correct

time.

To disconnect the set from the mains

completely, withdraw the mains plug from the

wall socket.

RADIO ON

• Set the RADIO switch ® to ON.

• Select the waveband using BAND switch iji).

• Select the required station using the TUNING

® knob.

• Adjust the sound level with the VOLUME

switch

RADIO OFF

• Set the RADIO ® switch to OFF.

Aerials

- The AM aerial is built into the appliance. You

may have to adjust the position of the clock

radio slightly for better reception.

- For FM reception, there is an aerial wire at the

rear of the clock radio. This wire must be

extended and if necessary adjusted slightly in

order to obtain good reception.

CLOCK

_________________________________

Clock display

The clock indicates shows the time. The display

also indicates whether you have switched on the

alarm. If alarm 1 is on, the alarm 1 indicator

lights up.

For alarm 2 the alarm 2 •: indicator lights up and

for dual alarm both light up.

Setting the time

• Keep the TIME button ® pressed and set the

correct time as follows:

- Fast forward with the FAST UP ® button.

- Slow backward with the SLOW DOWN button

®.

• Release the TIME button

0

. The correct time

appears in the display.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments