Philips SOUNDMACHINE AZ1836 User Manual download pdf (Page 8)

MP3-CD/ CD Player

2 Press CD/USB to enter CD mode if USB

is displayed.

➜ Display will show --- (See 2).

3 Open the disc door.

4 Insert a disc with the printed side facing up

and press the disc door gently to close.

➜ Display:The total number of tracks

appears.

➜ The disc scanning of MP3-CD may run

longer than audio CD.

5 Press

2;

to start playback.

➜ Display:

2

and the current track number.

For MP3-CD/ WMA only:

➜ The current track number “XXX“ and

album number “ALB XXX“ will be

displayed interchangeably (See 45).

6 To pause playback press

2;

.

➜ Display:

2

and the current track number

flash.

7 Press

2;

again to resume playback.

8 To stop playback, press

9

.

Helpful hints:

The disc playback will also stop when:

–you open the disc compartment door;

–you select FM, MW or OFF position;

– the disc has reached the end of the playback.

Selecting a different track

• Press ∞ or § once or repeatedly until the

desired track number appears in the display.

For MP3-CD/WMA: First press

ALBUM

+/- once or more to find your

album.

• In the pause/stop position, press 2; to start

playback.

Finding a passage within a

track

1 During playback, press and hold down

∞ or §

.

➜ The disc is played at high speed and low

volume.

2 When you recognize the passage you want,

release

∞ or §

.

➜ Normal playback resumes.

Programming tracks

You may store up to 20 tracks in the desired

sequence. If you like, store any track more

than once.

1 In the stop position, press PROG to start

programming.

➜ Display shows P01 indicating the start

of

the program. PROG flashes. (See 6)

2 Press

∞

or

§

to select your desired track

number.

For MP3-CD/WMA: First press

ALBUM

+/- once or more to find your

album.

3 Press PROG to store the desired track.

➜ Display shows P02, indicating the next

program location available.

4 Repeat steps 2 to 3 to select and store all

desired tracks.

5 Press

2;

to play the program.

To review your program

In the stop position, press and hold PROG

3 seconds.

➜ The display shows all the stored tracks in

sequence.

Helpful hints:

– Display shows P01 if no track is

programmed.

– If you try to store more than 20 tracks, no

track can be stored and the display will show

FUL.

AZ1836_98_CCR 9/11/07 11:09 Page 8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments