Philips DVD710/05 User Manual

INTRODUCTION ...P 5INSTALLATION ...

NOTE- If you forget your PIN code, you can erase it when the codeis requested as above, by pressing 9 four times. ParentalControl will then be de-acti

CHANGING THE AUDIO LANGUAGE AND CHANNELCONFIGURATIONThis changes the language and the audio channel configura-tion when alternatives are available on

You will recognize Video CDs by the logo. Depending on the material on the disc (amovie, video clips, a drama series, etc.) itmay have one or more tra

NOTE- If the number has more than one digit, press the keys inrapid succession.PLAYBACK CONTROL (PBC)• Insert a Video CD with PBC and press 2. ➜ The P

• To exit Repeat mode, press REPEAT a third time for about 1second.A-B REPEATTo repeat or loop a sequence:• Press A-B REPEAT briefly at your chosen st

• To repeat the entire disc, press REPEAT a second time forabout 1 second; ➜ REPEAT appears on the display.• To exit Repeat mode, press REPEAT a third

To select Tracks:1 Insert a disc and go to Stop mode.2 Press r .3 Use l or r to move to the first track number you want toselect.4 Press b .5 Repeat s

Factory setting 16:9 (wide screen). If you have a regular (4:3)TV, you can choose Letterbox for a ‘wide-screen’ picture withblack bars top and bottom,

ACTIVATING PARENTAL CONTROLThis can only be done in Stop mode1 Press SETUP to obtain the Settings menu.2 Move to Parental Control using ob.3 Press l o

If it appears that the DVD-Video player is faulty, first consultthis checklist. It may be that something simple has been over-looked. Under no circums

6englishYour Philips DVD-Video player plays digital video discs confor-ming to the universal DVD-Video standard. With it, you willbe able to enjoy ful

If the fault persists, you can run the Diagnostic Program in theplayer.INSTRUCTIONS:1 Switch the player off.2 Hold both OPEN/CLOSE and ; pressed and s

1 ON/OFF2 Disc tray3 Tray OPEN/CLOSE4 Display5 REPEAT/chapter/track/title/disc 6O PREVious title/chapter/track 7P NEXT title/chapter/track 8 9 STOP9 ;

1 Remote control active (flashing)2 FTS (Favourite Track Selection) active3 SHUFFLE active4 PAUSE active5 SCAN active6 A-B REPEAT/CHAPTER/TITLE/TRACK

- Depending on your TV and other equipment, there arevarious ways you could connect the DVD-Video player.These are shown below.- Please refer to your

For multichannel sound, your player provides both digital andanalog audio outputs. DIGITAL (MPEG 2 MULTICHANNEL OR DOLBYDIGITAL™) MULTICHANNEL SOUND1

LOADING THE BATTERIES1 Open the battery compartment cover.2 Insert two 'AAA' (R03) batteries as indicated inside thebattery compartment.3 Cl

1 Press OPEN/CLOSE on the front of the player. The disc trayopens.2 Lay your chosen disc in the tray, label side up. Make sure itis sitting properly i

...........Audio language...........Audio system...........Rema