Philips BT7204/85 User Manual download pdf (Page 3)

Caution

- This appliance is not

washable. Never immerse the

appliance in water and do not

rinse it under the tap (Fig. 2).

- Only use this appliance for its

intended purpose as shown

in the user manual.

- For hygienic reasons, the

appliance should only be

used by one person.

- Never use compressed air,

scouring pads, abrasive

cleaning agents or aggressive

liquids such as petrol or

acetone to clean the

appliance.

- Do not use the supply unit in

or near wall sockets that

contain an electric air

freshener to prevent

irreparable damage to the

supply unit.

Electromagnetic fields (EMF)

- This Philips appliance complies with all

applicable standards and regulations regarding

exposure to electromagnetic fields.

General

- The supply unit is suitable for mains voltages

ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

- Maximum noise level: Lc = 75 dB(A).

Display

Battery status indicator

- When the battery is almost empty, the battery

charge indicator flashes orange (Fig. 3).

- When the appliance is charging, the battery

charge indicator flashes white (Fig. 4).

- When the battery is fully charged, the battery

charge indicator lights up white continuously

(Fig. 5).

Note: The lights switch off automatically after 30

minutes.

Length settings

The selected hair length setting will show above

the zoom wheel when you select the desired

length setting with the zoom wheel (Fig. 6).

Charging

Charging takes approx. 1 hour. Charge the

appliance before first use and when the bottom

light of the battery status indicator flashes orange.

1 Make sure the appliance is switched off.

2 Put the supply unit in the wall socket and put

the small plug in the appliance (Fig. 7).

3 After charging, remove the supply unit from the

wall socket and pull the small plug out of the

appliance.

When the appliance is fully charged, it has a

cordless operating time of up to 60 minutes.

Using the appliance

Note: This appliance can be used without cord or

directly from the power outlet.

You can use this appliance for a stubble and

a short beard. This appliance has an integrated

vacuum system that catches cut beard hair for

a less mess trimming experience.

The vacuum system is activated automatically as

soon as you switch on the appliance.

Note: Switch off and clean the appliance after each

use.

Switching the appliance on and off

Press the on/off button once to switch the

appliance on or off (Fig. 8).

Trimming without comb

- You can use the appliance without beard and

stubble comb to trim hair close to the skin or to

contour the neckline and sideburns. To trim hair

close to the skin, place the flat side of the

trimming head against your skin and make

strokes in the desired direction (Fig. 9).

- You can use the precision trimmer to create fine

lines and contours around your facial style,

close to the skin (Fig. 10). Simply pull the cutting

element straight off (Fig. 11) and insert the

precision trimmer (Fig. 12).

- For contouring hold the trimming head

perpendicular to the skin and move the

trimming head upwards or downwards with

gentle pressure (Fig. 13).

Trimming with comb

You can use the beard and stubble comb attached

to the cutting element to groom your beard and

moustache in your preferred style. You can choose

from 20 length settings ranging from 0.5mm to

10mm in steps of 0.5mm.

1 Attach the comb onto the appliance (Fig. 14).

2 Turn the zoom wheel to select the desired

length setting (Fig. 6).

Note: When you trim for the first time, start at

the highest length setting to familiarize yourself

with the appliance.

3 Switch on the appliance.

1 2 3 4 5 6

Comments to this Manuals

No comments

Philips BT7204/85 User Manual Page 3

Comments to this Manuals

Related products and manuals for Body groomers/shavers Philips BT7204/85