14 EN
7 Other features
Set the alarm timer
This unit can be used as an alarm clock. You
can select DISC, USB, or TUNER as the alarm
source.
Note
•
Make sure that you have set the clock correctly.
1 In standby mode, press and hold SLEEP/
TIMER for three seconds.
2 Press / repeatedly to select an
alarm source (DISC, USB,or TUNER)
3 Press SLEEP/TIMERtoconrm.
» The hour digits begin to blink.
4 Repeat steps 2-3 to set the hour, minute,
and adjust volume of the alarm.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
• Press SLEEP/TIMER repeatedly to view
the alarm information and activate or
deactivate the alarm.
» If the timer is activated,
[TIMER](Timer) is displayed.
» If the timer is deactivated, [TIMER
OFF] (timer off) is displayed and
[TIMER](Timer) disappears.
Tip
•
If the DISC/USB source is selected, but no disc is placed
or no USB connected, the system switches to the tuner
source automatically.
Set the sleep timer
• To set the sleep timer, when the unit
is switched on, press SLEEP/TIMER
repeatedly to select a set period of time
(in minutes).
• [SLP 120]
• [SLP 90]
• [SLP 60]
• [SLP 45]
• [SLP 30]
• [SLP 15]
• [SLP OFF]
» When the sleep timer is activated,
[SLEEP] (sleep)is displayed. Otherwise,
[SLEEP] (sleep) disappears.
Listen from an external
device
You can listen to an external device through this
unit with an audio cable.
1 Press USB/AUDIO IN repeatedly to select
the AUDIO IN source.
2 Connect an audio cable (not supplied)
between:
• the AUDIO IN socket (3.5 mm) on
the unit;
• and the headphone socket on an
external device.
3 Start to play music on the connected
device (see the device user manual).
Comments to this Manuals